NEMIX RAM 16GB DDR4 2933 CL21 1.2V 288-Pin UDIMM desktop RAM
- 16GB
- 288-Pin DDR4 UDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
16 GB DDR4-3200 ECC registered DIMM, CL22 at 1.2 V, 1Rx4 organisation, 288-pin, built with major-OEM chips for server stability
Capacity 16GB
This 16GB DDR4 registered module runs at 3200MT/s with CL22 latency and 1.20V operation. It targets administrators upgrading or expanding memory in servers and workstations that require ECC protection and registered signalling for multi-DIMM stability.
The jump is worthwhile when workloads demand error correction for data integrity or when the platform requires registered modules to populate all slots. Systems already running DDR4-3200 RDIMMs gain capacity without changing memory speed or voltage.
The 288-pin RDIMM seats in standard DDR4 server slots; no heat spreader means clearance is rarely an issue. The most common mistake is mixing registered and unbuffered modules or exceeding the motherboard's maximum rank-per-channel limit, which prevents the system from posting.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC RDIMM Registered Server Memory |
| Part Number | MR25600-614K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC RDIMM Registered Server Memory Motherboard Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module uses the standard 288-pin DDR4 RDIMM form factor, so it fits any server board with DDR4 RDIMM slots that support 3200 MT/s and registered ECC memory.
After seating the DIMM firmly until the clips lock, enable ECC and registered mode in the BIOS; many builders forget to save the memory configuration before exiting setup.
DDR4 RDIMMs have no moving parts and run at 1.20 V; replacement is typically only needed if a DIMM fails diagnostics or capacity must be increased beyond 16 GB.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟