نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green bare circuit board DDR5 memory module 288 pin 16GB

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V 288-pin UDIMM SuperMicro memory upgrade

SKU CH-VJA5-CDWS4

16 GB DDR5-4800 UDIMM module with CL40 timing and 1.1 V operation, built for SuperMicro systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 4800 CL40 boosts desktop responsiveness
  • 1 V operation reduces power draw per module
  • Single-rank 1Rx8 layout keeps signal integrity clean
  • 288-pin UDIMM form factor fits standard DDR5 desktop slots
  • Major OEM Samsung Micron Hynix chips ensure manufacturing consistency

16 GB DDR5 4800 UDIMM for SuperMicro

This module provides 16 GB of DDR5 4800 memory in a single 288-pin UDIMM. It is built for SuperMicro systems that accept non-ECC unbuffered DIMMs at 1.10 V. The CL40 timing and 1Rx8 organisation match the MEM-DR516L-CL01-UN48 specification.

Suits SuperMicro DDR5 desktops and workstations

It fits owners of compatible SuperMicro platforms who need a straightforward capacity increase without ECC or registered buffering. Builders requiring ECC error correction, registered modules, or speeds above 4800 MT/s should select a different part.

Non-ECC unbuffered DDR5 at 4800 MT/s

The memory operates as non-ECC unbuffered DDR5 at 4800 MT/s with CL40 latency. This single characteristic determines whether the module will function in a given SuperMicro motherboard.

أبرز المميزات

  • 16 GB DDR5 4800 CL40 boosts desktop responsiveness
  • 1 V operation reduces power draw per module
  • Single-rank 1Rx8 layout keeps signal integrity clean
  • 288-pin UDIMM form factor fits standard DDR5 desktop slots
  • Major OEM Samsung Micron Hynix chips ensure manufacturing consistency

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

أسئلة حول هذا المنتج

Will this 288-pin DDR5 UDIMM fit my Supermicro motherboard DIMM slots?

The module uses the standard 288-pin DDR5 UDIMM form factor and is built for Supermicro systems; align the notch with the slot key and press down until the retention clips click.

What is the correct seating procedure for this 1.10 V 1Rx8 stick, and what step do builders often miss?

Open both slot clips, match the module notch to the slot key, press firmly until the clips snap shut automatically; the missed step is failing to verify both clips are fully locked.

Does the lack of a heat spreader on this CL40 4800 MHz module mean I must add active airflow later?

The module ships without a heat spreader; ensure your chassis provides adequate airflow over the DIMM area, as sustained loads rely on case ventilation rather than a dedicated spreader.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.