نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 262-PIN ECC SODIMM memory upgrade

SKU CH-8M28-VM7VK

16 GB DDR5 ECC SODIMM running at 5600 MT/s with CL46 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data corruption in critical workloads
  • 16 GB capacity expands memory for demanding applications
  • 5600 MHz DDR5 speed delivers high bandwidth performance
  • 1 V operation reduces power consumption and heat
  • 262-pin SODIMM form factor fits compatible Samsung systems

Samsung-Compatible DDR5 ECC SODIMM

This NEMIX RAM module is a 16GB DDR5 5600 CL46 ECC unbuffered SODIMM built for Samsung systems needing error-correcting memory. It targets IT professionals and technicians upgrading compatible Samsung servers, workstations, laptops or all-in-one PCs where ECC SODIMMs are required.

Tool-free SODIMM slot installation

Installation follows the standard SODIMM procedure: power down, open the memory access panel, align the 262-pin key notch, press firmly until the retention clips latch, then reassemble. The most common issue is a loose seat that prevents POST; re-seat both sides evenly if the system fails to recognise the module.

ECC unbuffered DDR5 at 5600 MT/s

The single specification that determines fit is the DDR5 5600 (PC5-44800) ECC unbuffered SODIMM interface with CL46 latency at 1.1 V. Systems requiring registered ECC, non-ECC DDR5, a different DDR generation, or a DIMM form factor cannot use this module.

أبرز المميزات

  • ECC protection prevents data corruption in critical workloads
  • 16 GB capacity expands memory for demanding applications
  • 5600 MHz DDR5 speed delivers high bandwidth performance
  • 1 V operation reduces power consumption and heat
  • 262-pin SODIMM form factor fits compatible Samsung systems

المواصفات

BrandNEMIX RAM
SeriesSamsung Server/Workstation Compatible Series Memory
ModelSamsung DDR5 5600MHZ ECC Unbuffered SODIMM
Part NumberMSE44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSamsung
CAS LatencyCL46
Heat SpreaderNo
Type262-PIN DDR5 ECC SODIMM
Rank1Rx8
FeaturesDDR5 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 262-PIN ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

How can I verify the module is running at 5600 MT/s with CL46 timings after installation?

Open Task Manager or your BIOS/UEFI and confirm the speed shows 5600 MT/s and CAS latency reads 46; the module operates at 1.1 V so the voltage should match

What is included in the package and do I need any extra parts?

The box contains one 16 GB 262-pin DDR5 ECC unbuffered SODIMM; no heat spreader, cables or brackets are supplied or required

Which version of this memory should I select for a Samsung system that needs DDR5 5600 ECC SODIMM?

Choose the 16 GB 1Rx8 module with part number MSE44800-618K1; it matches the Samsung M426R2GA3DB0-CWM specification exactly

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.