نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Eight green DDR4 UDIMM sticks in a row

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR4 2933 PC4-23400 CL21 1.2V 2Rx8 288-Pin UDIMM Kit

SKU CH-7X1S-QHRFQ

Eight 32 GB DDR4 2933 UDIMM modules deliver 256 GB of unbuffered non-ECC memory for compatible Supermicro systems

  • Capacity256GB (8 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 256 GB total capacity from eight 32 GB modules
  • DDR4 2933 MT/s rated speed for high-throughput workloads
  • 20 V operating voltage for efficient power use
  • CL21 CAS latency with 2Rx8 dual-rank organisation
  • Validated for Supermicro 5039AD-I and C9X299-PGF workstations

SuperMicro Compatible 256GB Kit

This NEMIX RAM kit delivers 256GB across eight 32GB DDR4 UDIMM modules built for SuperMicro desktop and SuperWorkstation platforms such as the 5039AD-I and MBD-C9X299-PGF. The 2933 MT/s PC4-23400 speed and CL21 latency suit memory-intensive workloads on supported workstations. It is not for systems that require ECC or registered DIMMs.

Tool-less DIMM Installation

Each 288-pin unbuffered module installs directly into standard DDR4 slots without additional hardware or cables. Align the notch, press until the latches click, and the firmware detects the 2Rx8 organisation automatically. Builders who need registered or load-reduced memory cannot use this kit.

Sustained Load Stability

Modules are stress tested under load at 1.20V to maintain timing consistency during extended compute sessions. The absence of a heat spreader means airflow across the PCB manages thermals in densely populated SuperMicro chassis. Systems without adequate case ventilation may see higher sustained temperatures.

أبرز المميزات

  • 256 GB total capacity from eight 32 GB modules
  • DDR4 2933 MT/s rated speed for high-throughput workloads
  • 20 V operating voltage for efficient power use
  • CL21 CAS latency with 2Rx8 dual-rank organisation
  • Validated for Supermicro 5039AD-I and C9X299-PGF workstations

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K8
Capacity256GB (8 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content256GB (8X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

أسئلة حول هذا المنتج

How can I verify the kit is running at 2933 MT/s after installation?

Open the system BIOS or use a tool such as CPU-Z to confirm the memory frequency reads 2933 and the timings show CL21 at 1.2 V.

What exactly ships in the box and is anything else required?

The package contains eight 32 GB DDR4 UDIMM modules for a total of 256 GB; no extra cables, brackets or software are needed.

Which capacity option should I pick for a SuperMicro board that supports 256 GB maximum?

Choose this 256 GB (8 x 32 GB) kit to fully populate the board and reach its supported memory limit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.