نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green circuit boards with black chips and gold contacts side by side

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X14SAE-F

SKU CH-WRFW-9Q7NH

A 32 GB DDR5 kit with two 16 GB UDIMMs running at 5600 MT/s, CL46 and 1.1 V, built for the Supermicro X14SAE-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB capacity expands multitasking headroom with a 2×16 GB kit
  • DDR5 5600 speed matches the board's rated memory clock for full performance
  • CL46 latency and 1.1 V voltage align with the controller's timing expectations
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F DIMM slots exactly
  • Major OEM chips from Samsung, Micron or Hynix deliver tested stability at rated specs

Exact DDR5 5600 kit for Supermicro X14SAE-F

This 32 GB kit contains two 16 GB UDIMM modules built to the DDR5 5600 standard at 1.1 V with CL46 timing. It targets owners of the Supermicro X14SAE-F motherboard who need a matched pair that the board recognises at full capacity and rated speed without manual tuning. The 1Rx8 organisation and unbuffered design match the board's native memory population rules.

DDR5 5600 ceiling and UDIMM slot limits

DDR5 5600 (PC5-44800) is the maximum JEDEC speed this platform supports, so the kit cannot run faster without overclocking headroom the board may not provide. The 288-pin unbuffered form factor fits only desktop UDIMM slots; it will not work in server RDIMM or laptop SODIMM sockets. Buyers who need ECC error correction or registered buffering must choose a different module type.

Replaces slower or smaller DDR5 kits

Swapping a lower-frequency DDR5 kit or a single-module configuration for this matched 2×16 GB pair restores dual-channel bandwidth and raises the memory clock to the board's top validated rate. The jump is worthwhile when the current memory runs below 5600 MT/s or when total capacity is under 32 GB. Systems already running DDR5 5600 at 32 GB in dual channel will not see further gains from this kit.

أبرز المميزات

  • 32 GB capacity expands multitasking headroom with a 2×16 GB kit
  • DDR5 5600 speed matches the board's rated memory clock for full performance
  • CL46 latency and 1.1 V voltage align with the controller's timing expectations
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F DIMM slots exactly
  • Major OEM chips from Samsung, Micron or Hynix deliver tested stability at rated specs

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Should I choose the 32 GB kit or a single 16 GB module for the Supermicro X14SAE-F?

The 32 GB kit provides two 16 GB UDIMMs that match the board's dual-channel architecture, delivering full rated capacity and DDR5-5600 speed without mixing ranks.

What does the DDR5-5600 rating mean once the modules are installed in the X14SAE-F?

The memory controller will run the kit at 5600 MT/s with CL46 latency at 1.1 V, giving the bandwidth and timing the board expects for stable operation.

Does the 288-pin UDIMM interface limit the speed or features on this motherboard?

The 288-pin unbuffered UDIMM form factor is exactly what the X14SAE-F requires; it supports the full DDR5-5600 data rate and non-ECC operation without capping performance.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.