BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00280234BTC
متوفر
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR3 1866 PC3-14900 1.35V 204-Pin SODIMM Kit iMac 27" 2015 memory upgrade
32 GB DDR3 SODIMM kit (2 × 16 GB) running at 1866 MHz CL13 1.35 V for the 27-inch 2015 iMac
- Capacity32GB (2 x 16GB)
- SpeedDDR3 1866 (PC3 14900)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 32 GB kit expands iMac 27" 2015 memory capacity
- DDR3 1866 speed matches factory specification
- 35 V low-voltage modules reduce power draw
- 204-pin SODIMM form factor fits Late 2015 Retina 5K slot
- CL13 latency supports responsive multitasking
iMac 27" Late 2015 32GB DDR3 Kit
This 32GB kit contains two 16GB DDR3 1866 SODIMM modules built for the Apple iMac 27-inch Late 2015 with Retina 5K display. It runs at 1.35V with CL13 latency and uses 204-pin unbuffered non-ECC chips from major OEM suppliers.
Suits owners of that specific iMac model
The kit matches the factory speed and voltage for the Late 2015 27-inch iMac, so it installs directly into the two SODIMM slots. Systems that require ECC, registered modules, a different pin count or a different DDR generation will not accept this memory.
Deciding spec: 1866MHz DDR3 204-pin SODIMM
The modules operate at DDR3 1866 (PC3-14900) in the 204-pin SODIMM form factor. If your Mac calls for that exact speed and pin layout, the kit fits; if the machine needs another speed, voltage or form factor, this memory will not work.
أبرز المميزات
- 32 GB kit expands iMac 27" 2015 memory capacity
- DDR3 1866 speed matches factory specification
- 35 V low-voltage modules reduce power draw
- 204-pin SODIMM form factor fits Late 2015 Retina 5K slot
- CL13 latency supports responsive multitasking
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | Apple iMac/Mac Mini Compatible Series Memory |
| Model | Apple DDR3 1866MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS14900-428LK2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR3 1866 (PC3 14900) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Apple |
| CAS Latency | CL13 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR3 1866MHZ PC3-14900 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
أسئلة حول هذا المنتج
Will my iMac 27" Late 2015 need a firmware update before it recognises the 1866 MHz DDR3 SODIMMs?
No firmware update is required; the Mac's memory controller detects the 1866 MHz DDR3 modules at boot and configures them automatically.
Can I keep one of the original 8 GB sticks and add a single 16 GB module from this kit?
The kit is validated as a matched 2 x 16 GB pair; mixing capacities or ranks can prevent dual-channel operation and may cause instability.
How do I confirm the memory is running at 1866 MHz with CL13 timing after installation?
Open About This Mac → System Report → Memory; each slot should show 16 GB, DDR3, 1866 MHz, and the timing will read CL13.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
