نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR4 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 SODIMM POSIFLEX RT-6016 memory upgrade

SKU CH-7AWA-S9TK7

A 32 GB DDR4 SODIMM kit (2 × 16 GB) running at 2400 MHz CL17, 1.20 V, 260-pin, non-ECC unbuffered, validated for the POSIFLEX RT-6016 terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit doubles terminal capacity for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX RT-6016 specifications
  • CL17 latency keeps response times tight under load
  • 2 V low-voltage modules reduce power draw and heat
  • 260-pin SODIMM form factor fits the terminal slot exactly

POSIFLEX RT-6016 memory kit

This 32GB DDR4 kit contains two 16GB SODIMM modules built for the POSIFLEX RT-6016 terminal. It uses 260-pin unbuffered non-ECC memory running at 2400MHz with CL17 latency. System integrators upgrading compatible point-of-sale hardware can install the pair without configuration changes.

Thermals and power at 1.20V

Each module operates at the standard DDR4 voltage of 1.20V and has no heat spreader. The low-voltage design keeps power draw modest during typical terminal workloads. Passive cooling inside the slim chassis is sufficient for normal daily operation.

Sustained load behaviour

Modules are stress tested under load before shipping to verify stability during extended use. The 2Rx8 organisation supports consistent throughput for long transaction queues or background tasks. No thermal throttling occurs within the terminal's specified operating envelope.

أبرز المميزات

  • 32 GB kit doubles terminal capacity for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX RT-6016 specifications
  • CL17 latency keeps response times tight under load
  • 2 V low-voltage modules reduce power draw and heat
  • 260-pin SODIMM form factor fits the terminal slot exactly

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

أسئلة حول هذا المنتج

How do I install the 260-pin SODIMM modules in the POSIFLEX RT-6016, and what step is often missed?

Insert each module at an angle into the slot until the gold contacts are fully hidden, then press down firmly until the side clips click into place; the step often missed is pressing down hard enough to engage both clips.

What maintenance or replacement will this 32GB DDR4 kit need later?

No scheduled maintenance is required; if a module fails, replace it with another 260-pin DDR4 2400 CL17 1.2V SODIMM of matching capacity and rank.

What limit appears first when the POS terminal runs sustained workloads on this memory?

The CL17 latency at DDR4 2400 sets the throughput ceiling; sustained heavy loads will hit that bandwidth limit before voltage or thermal throttling becomes a factor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.