نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR5 RDIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 ECC RDIMM for HP Z8 G5 Fury G5 memory upgrade

SKU CH-PPNP-BRYS6

32 GB dual-channel DDR5 4800 ECC registered kit with two 16 GB modules at CL40 and 1.1 V for HP Z8 G5 workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB dual-channel kit expands workstation memory capacity
  • DDR5 4800 speed with CL40 latency accelerates data-intensive workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • 1 V operating voltage reduces power draw under sustained load
  • Validated for HP Z8 G5 and Fury G5 workstations for guaranteed compatibility

HP Z8 G5 Fury G5 compatible DDR5 ECC RDIMM kit

This 32 GB kit contains two 16 GB DDR5 4800 registered DIMMs built for HP Z8 G5 and Z8 Fury G5 workstations. ECC and registered operation protect data integrity in professional workloads. Modules run at 1.1 V with CL40 latency and a 1Rx8 organisation.

DDR5 4800 registered ECC limits

The DDR5 4800 standard delivers 38400 MB/s peak bandwidth per module at 1.1 V. Registered buffering adds one clock cycle of latency and requires a motherboard memory controller that supports RDIMMs. ECC cannot function on platforms lacking the necessary controller support.

Verify workstation memory configuration before

Confirm the Z8 G5 or Z8 Fury G5 accepts 288-pin DDR5 RDIMMs and check the maximum supported capacity per slot. Ensure the BIOS is current enough for DDR5 4800 registered modules. This kit is not suitable for systems that require unbuffered UDIMMs or non-ECC memory.

أبرز المميزات

  • 32 GB dual-channel kit expands workstation memory capacity
  • DDR5 4800 speed with CL40 latency accelerates data-intensive workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • 1 V operating voltage reduces power draw under sustained load
  • Validated for HP Z8 G5 and Fury G5 workstations for guaranteed compatibility

المواصفات

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

أسئلة حول هذا المنتج

Should I pick the 32GB (2x16GB) kit or a different capacity for my HP Z8 G5 Fury G5?

This kit provides 32GB total across two 16GB modules, matching the dual-channel layout recommended for the HP Z8 G5 Fury G5 workstation.

What does the DDR5 4800 speed mean for actual workloads on this workstation?

The modules run at 4800 MT/s with CL40 latency, delivering PC5-38400 bandwidth for memory-intensive tasks like rendering and simulation on the HP Z8 G5 Fury G5.

How does the 288-pin RDIMM interface and ECC registration affect compatibility?

The 288-pin DDR5 RDIMM form factor with registered ECC is required by the HP Z8 G5 Fury G5 memory controller; it will not fit or function in UDIMM-only platforms.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.