NEMIX RAM
NEMIX RAM 384GB (4×96GB) DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM Supermicro H13SRH memory upgrade
384GB DDR5 6400 CL52 2Rx4 ECC Registered RDIMM kit validated for Supermicro H13SRH motherboards
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from four 96 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput at 1.10 V
- Registered ECC RDIMM architecture enables full-slot population and single-bit error correction
- 288-pin 2Rx4 form factor matches Supermicro H13SRH memory-controller requirements exactly
- Built with major OEM Samsung Micron Hynix DRAM for enterprise-grade reliability
Exact-match DDR5 kit for Supermicro H13SRH
This 384GB kit contains four 96GB DDR5 6400 Registered ECC RDIMMs built to the precise rank, voltage, and timing the H13SRH memory controller expects. The modules are 2Rx4, run at 1.1V with CL52 latency, and use the 288-pin RDIMM form factor the board requires.
Simple slot installation with manual checks
Install by seating each 288-pin RDIMM into the correct DIMM slots following the motherboard manual population order. Because server memory support varies by model, verify supported capacities and approved slot sequence before purchase to avoid unrecognised modules or reduced speeds.
Suited for fully populated H13SRH servers needing
Registered buffering offloads the controller so every slot runs at full capacity while ECC corrects single-bit errors on the fly. Not for systems that require UDIMM or SODIMM form factors, non-ECC memory, or lower-density modules than 96GB per DIMM.
أبرز المميزات
- 384 GB total capacity from four 96 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput at 1.10 V
- Registered ECC RDIMM architecture enables full-slot population and single-bit error correction
- 288-pin 2Rx4 form factor matches Supermicro H13SRH memory-controller requirements exactly
- Built with major OEM Samsung Micron Hynix DRAM for enterprise-grade reliability
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
How can I confirm the kit is running at DDR5 6400 with CL52 after installing it in my Supermicro H13SRH?
Enter the BIOS or use a hardware monitor to verify the memory frequency shows 6400 MT/s and the CAS latency reads 52; the registered ECC design ensures each 96 GB module is recognised at full capacity.
What exactly ships in the box and is anything else required to reach 384 GB?
The package contains four 96 GB 288-pin DDR5 RDIMMs for a total of 384 GB; no additional modules or accessories are needed to achieve the rated capacity on a compatible board.
Which capacity version should I choose if my H13SRH manual lists 96 GB RDIMMs as the maximum per slot?
Select this 384 GB kit (4 × 96 GB) because each registered 2Rx4 DIMM matches the board's maximum supported density per slot and the kit populates all four channels.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



