NEMIX RAM
NEMIX RAM 384GB DDR5 6400 CL52 1.1V ECC RDIMM 4x96GB memory upgrade for Supermicro H14SSL-NT
A 384 GB DDR5 6400 ECC RDIMM kit of four 96 GB modules at CL52 and 1.1 V, built for the Supermicro H14SSL-NT
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB kit recognised at full capacity and rated speed
- Registered ECC architecture offloads the controller and corrects single-bit errors
- 1 V DDR5-6400 CL52 matches the server memory controller exactly
- 288-pin RDIMM form factor fits the Supermicro H14SSL-NT motherboard
- Four 96 GB dual-rank modules populate every slot for maximum density
Exact-match DDR5 upgrade for Supermicro H14SSL-NT
This NEMIX RAM kit provides 384GB of DDR5 memory in four 96GB modules. It is built as registered ECC RDIMM for the Supermicro H14SSL-NT motherboard. The modules run at 6400MHz with CL52 latency and 1.1V operation. System integrators and server administrators get a validated, full-capacity upgrade.
Sustained-load behaviour with registered ECC
Registered architecture buffers the command bus so all four slots operate at rated speed when fully populated. ECC detects and corrects single-bit errors during continuous operation. The 2Rx4 organisation and 1.10V voltage match the memory controller expectations for stable throughput under heavy workloads.
Verify DIMM population rules before ordering
Consult the Supermicro H14SSL-NT manual for approved capacity limits, slot population order, and BIOS configuration steps. The board requires 288-pin RDIMM modules; UDIMM or SODIMM variants will not fit. Confirm that your firmware revision supports 384GB total capacity and 96GB per module.
أبرز المميزات
- 384 GB kit recognised at full capacity and rated speed
- Registered ECC architecture offloads the controller and corrects single-bit errors
- 1 V DDR5-6400 CL52 matches the server memory controller exactly
- 288-pin RDIMM form factor fits the Supermicro H14SSL-NT motherboard
- Four 96 GB dual-rank modules populate every slot for maximum density
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
Does the 1.10 V DDR5 kit generate less heat than higher-voltage modules during continuous operation?
The modules run at 1.10 V, which is the standard DDR5 operating voltage, so thermal output matches the JEDEC baseline for this speed grade.
What motherboard slot type is required for these 288-pin RDIMMs to function?
A DDR5 RDIMM slot on a registered-memory-capable server board such as the Supermicro H14SSL-NT is required.
Will the 2Rx4 registered ECC modules work in older DDR5 server boards I might keep?
They fit any DDR5 RDIMM slot that supports 2Rx4 registered ECC at 6400 MT/s, but you must verify the motherboard's qualified-vendor list and population rules first.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



