نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 CL40 2Rx8 1.1V UDIMM Supermicro X14SAE memory upgrade

SKU CH-458J-M5RRC

48 GB DDR5 module rated at 4800 MT/s with CL40 latency and 1.1 V operation for the Supermicro X14SAE motherboard

  • Capacity48GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 48GB

  • 48 GB capacity ready for heavy workloads
  • DDR5 4800 speed matches board specification
  • CL40 latency at 1.1 V for stable operation
  • 2Rx8 rank layout fits Supermicro X14SAE rules
  • Major OEM chips tested for reliability

Targeted DDR5 upgrade for Supermicro X14SAE

This 48GB DDR5 4800 UDIMM is built as an exact-match upgrade for the Supermicro X14SAE motherboard. It delivers the precise 2Rx8 rank structure, 1.1V operating voltage and CL40 timing the board's memory controller expects. The non-ECC unbuffered design matches the desktop-class DIMM slots on this platform.

Straightforward UDIMM installation

The 288-pin unbuffered module seats in standard desktop DDR5 slots without tools or cables. Problems usually arise when the motherboard manual's approved DIMM population order is ignored or when mixed capacities prevent the system from recognising the full 48GB. Consult the manual for the correct slot sequence before fitting the module.

DDR5 4800 bandwidth ceiling and capacity limit

The PC5-38400 interface caps peak data rate at the rated 4800 MT/s, so throughput cannot exceed this specification. A single 48GB UDIMM fills one slot, and the board's maximum supported memory per channel or per system will determine whether additional modules can be added. Voltage is fixed at 1.1V with no XMP headroom on this unbuffered part.

أبرز المميزات

  • 48 GB capacity ready for heavy workloads
  • DDR5 4800 speed matches board specification
  • CL40 latency at 1.1 V for stable operation
  • 2Rx8 rank layout fits Supermicro X14SAE rules
  • Major OEM chips tested for reliability

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-4828K1
Capacity48GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I confirm the memory is running at 4800MHz CL40 after installing it in my Supermicro X14SAE?

Enter the BIOS or use a system information tool such as CPU-Z to verify the memory frequency reads 4800MHz and the CAS latency shows CL40; the module should be recognised at its full 48GB capacity without manual tuning.

What does the kit contain and do I need any extra parts to install it?

The kit includes one 48GB DDR5 4800MHz 2Rx8 1.1V CL40 288-pin Non-ECC Unbuffered UDIMM; no additional components are required — just an available DIMM slot on the motherboard.

Which capacity should I choose if I want the exact-match upgrade for this board?

This part number MD38400-4828K1 is the 48GB exact-match upgrade specified for the Supermicro X14SAE; select this capacity to match the board's validated memory population rules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.