BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
A 48GB DDR5 5600 CL46 UDIMM module built for ASRock IMB-1315 and IMB-1318 motherboards
This NEMIX RAM module provides 48GB of DDR5 memory in a single 288-pin UDIMM. It runs at 5600MHz with a CAS latency of CL46 and operates at 1.10V. The kit is validated for ASRock Industrial Micro-ATX motherboards IMB-1315 and IMB-1318.
Builders expanding an ASRock Industrial IMB-1315 or IMB-1318 system gain a direct-fit 48GB stick without mixing modules. The non-ECC unbuffered design matches the desktop-class memory controllers on these boards. Buyers needing ECC error correction or registered signal buffering for server platforms should look elsewhere.
The decisive specification is the 48GB density on one 2Rx8 rank UDIMM running at PC5-44800 speed. This delivers maximum capacity per slot on the two supported motherboards. Systems requiring lower-density modules or a different voltage must choose another part.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K1 |
| Capacity | 48GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 48GB (1 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM |
This kit is a single 48 GB UDIMM, so it occupies one slot and leaves the second channel free for a matching stick if you want dual-channel bandwidth later.
The board’s memory controller will run the module at 5600 MT/s with CL46 timings at 1.1 V, giving the maximum standard DDR5 throughput those Micro-ATX platforms support.
The 288-pin unbuffered DDR5 slot caps the module at the JEDEC 5600 MT/s standard; no higher data rate or lower latency is possible without board-level overclocking support.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟