نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular DDR4 UDIMM module with gold contacts and black chips no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR4 2133 ECC UDIMM CL15 1.2V 288-PIN memory upgrade

SKU CH-62V5-EWFXS

A 4 GB DDR4 2133 ECC UDIMM module with CL15 latency and 1.2 V operation for compatible workstations

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 2133 MHz DDR4 speed delivers responsive system performance
  • Low 1.2 V operation reduces power draw and heat
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop and workstation slots

ECC UDIMM for Hynix systems

This 4 GB DDR4 2133 module adds error-correcting memory to compatible Hynix workstations and servers. It runs at 1.20 V with CL15 latency and uses a single-rank 1Rx8 organisation. The unbuffered design keeps the signal path short for stable operation in supported platforms.

288-pin DIMM slot requirement

Installation requires a free DDR4 UDIMM socket that accepts 288-pin modules. No heat spreader is fitted, so the stick fits in tight clearance areas without extra height. The module draws standard DDR4 voltage, leaving the existing power budget untouched while adding 4 GB of ECC capacity.

Suited for ECC-capable Hynix platforms

Builders maintaining or expanding Hynix-branded workstations or servers that support unbuffered ECC DDR4 will find this a direct match. Systems that need registered or load-reduced DIMMs, or platforms limited to non-ECC memory, cannot use this module.

أبرز المميزات

  • ECC protection prevents data corruption in critical workloads
  • 2133 MHz DDR4 speed delivers responsive system performance
  • Low 1.2 V operation reduces power draw and heat
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop and workstation slots

المواصفات

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC Unbuffered UDIMM
Part NumberME17000-418K1
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx8
FeaturesDDR4 2133MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN ECC Unbuffered UDIMM

أسئلة حول هذا المنتج

Will the CL15 latency hold up when the module runs at 2133 MHz all day?

Yes, the rated CAS latency is CL15 at the full DDR4 2133 speed.

Does the lack of a heat spreader make the stick run hot or noisy in a server chassis?

The module operates at 1.20 V without a spreader; airflow from the system fans normally keeps temperatures in check.

Which motherboard slot does this 288-pin UDIMM need to work?

It requires a standard DDR4 UDIMM slot that supports ECC unbuffered memory.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.