NEMIX RAM
NEMIX RAM 512GB 8x64GB DDR5 6400 CL52 1.1V 2Rx4 RDIMM ECC memory upgrade for Supermicro H14DSG-OM
Eight-module 512 GB DDR5 6400 CL52 1.1 V 2Rx4 ECC RDIMM kit validated for the Supermicro H14DSG-OM motherboard
- Capacity512GB (8 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity for memory-intensive workloads
- DDR5 6400 speed with CL52 latency for high-throughput server tasks
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 1 V operation at 2Rx4 rank matches the board's memory controller spec
- 288-pin RDIMM form factor validated for the Supermicro H14DSG-OM motherboard
Exact-fit 512GB DDR5 kit for Supermicro H14DSG-OM
This 512GB kit delivers eight 64GB DDR5-6400 Registered ECC modules built to the precise rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It is intended for administrators upgrading that specific server platform to its full supported capacity.
288-pin RDIMM form factor
Each module uses the 288-pin RDIMM form factor required by the board, not UDIMM or SODIMM. The registered design buffers address and command signals so all eight slots can be populated at full speed, while on-die ECC corrects single-bit errors before they affect workloads.
1.1V operation at CL52 2Rx4 organization
The modules run at the standard 1.1V DDR5 voltage with CL52 latency and a 2Rx4 rank structure, matching the board's qualified configuration. This combination keeps power draw predictable and thermal load consistent across fully populated channels during sustained server workloads.
أبرز المميزات
- 512 GB total capacity for memory-intensive workloads
- DDR5 6400 speed with CL52 latency for high-throughput server tasks
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 1 V operation at 2Rx4 rank matches the board's memory controller spec
- 288-pin RDIMM form factor validated for the Supermicro H14DSG-OM motherboard
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 8X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
Does DDR5 6400 with CL52 run at the rated speed on the Supermicro H14DSG-OM?
Yes, the kit is spec-matched to the motherboard's memory controller so the 8x64GB modules are recognised at full capacity and operate at DDR5 6400 with CL52 timing.
What physical slot and form factor does this 288-pin RDIMM kit require?
The motherboard needs 288-pin DDR5 RDIMM slots; the modules are registered DIMMs, not UDIMM or SODIMM, and the kit provides eight 64GB sticks for full population.
How should the eight modules be installed, and what step is often missed?
Follow the motherboard manual's DIMM population order for the H14DSG-OM; the step most often missed is placing each 64GB RDIMM in the exact slot sequence the manual specifies for eight-module configurations.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



