نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Twelve green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 576GB 12x48GB DDR5 5600 CL46 2Rx8 1.1V ECC RDIMM Supermicro H13SSW

SKU CH-CKG5-JH24A

A 576GB DDR5 server memory kit of twelve 48GB ECC registered RDIMMs at 5600MHz CL46, validated for the Supermicro H13SSW motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

عرض 24 تكوينات إضافية
  • 576 GB total capacity for memory-intensive server workloads
  • 12 x 48 GB modules fill every slot on the Supermicro H13SSW
  • DDR5 5600 CL46 timing matches the board's rated speed
  • Registered ECC design corrects single-bit errors in real time
  • 1 V operation meets the platform's voltage specification

Exact-Match Server Upgrade

This 576GB kit provides twelve 48GB DDR5 5600 RDIMMs validated for the Supermicro H13SSW motherboard. Each module is a registered ECC DIMM with 2Rx8 organisation and CL46 timing at 1.10V. The precise rank, voltage and latency match the board's memory controller requirements so the full capacity is recognised at rated speed. Builders populating every slot on this platform get the exact configuration the firmware expects.

Thermals Noise Power

Registered buffering reduces electrical load on the memory controller, allowing all twelve slots to run fully populated without extra stress. The modules operate at the standard 1.10V DDR5 voltage and carry no heat spreaders, relying on server chassis airflow for cooling. Power draw scales with the 5600 MT/s data rate and 48GB density per DIMM. Acoustic output is determined by the system fans rather than the memory itself.

Sustained Load Behaviour

ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. Registered architecture keeps signal integrity stable across all populated channels when the memory subsystem is saturated. The kit is specified for continuous operation at DDR5 5600 with CL46 latency. Buyers needing capacities beyond 576GB or different DIMM types must consult the motherboard manual for supported configurations.

أبرز المميزات

  • 576 GB total capacity for memory-intensive server workloads
  • 12 x 48 GB modules fill every slot on the Supermicro H13SSW
  • DDR5 5600 CL46 timing matches the board's rated speed
  • Registered ECC design corrects single-bit errors in real time
  • 1 V operation meets the platform's voltage specification

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install the 12 DDR5 RDIMM modules in the Supermicro H13SSW, and which population step is often missed?

Populate all 12 slots following the motherboard manual's exact DIMM order; the step most often missed is verifying the approved population sequence for full 576GB capacity before powering on.

What maintenance or replacement will the 2Rx8 ECC RDIMM kit need over its service life?

The modules have no moving parts or heat spreaders; maintenance is limited to keeping server airflow clean, and replacement occurs only if ECC logs report uncorrectable errors on a specific DIMM.

What limit appears first when the 576GB kit runs sustained workloads at DDR5 5600 CL46?

The registered buffer and 1.1V operation keep signal integrity stable, so the first limit is typically the platform's maximum memory-controller throughput rather than the DIMMs themselves.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.