BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00278531BTC
متوفر
NEMIX RAM
NEMIX RAM 576GB (12x48GB) DDR5 5600 PC5-44800 CL46 2Rx8 1.1V ECC RDIMM Supermicro H13SSF memory upgrade
576 GB DDR5 5600 ECC RDIMM kit with twelve 48 GB modules, CL46 latency, 1.1 V registered design verified for Supermicro H13SSF
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576 GB total capacity from 12 modules of 48 GB each for maximum server density
- DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SSF motherboard's memory slots
Exact-match DDR5 kit for Supermicro H13SSF
This 576GB kit contains twelve 48GB DDR5 5600 RDIMMs built to the precise rank, voltage and timing the H13SSF memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. The modules are new and spec-matched to the board's population rules.
DDR5 5600 Registered ECC interface limits
The 288-pin RDIMM form factor is required; UDIMM or SODIMM modules will not fit or function. Registered buffering offloads the controller so all twelve slots can be filled without signal degradation. ECC protects data integrity but adds latency that is fixed at CL46 for this speed grade. Voltage is set at 1.10V and cannot be changed.
576GB capacity and headroom
Twelve 48GB dual-rank modules deliver the full 576GB the kit provides, suitable for large in-memory databases and virtualisation workloads. Population beyond twelve DIMMs is not possible on this platform, so capacity stops here. Workloads needing more memory would require a different motherboard or higher-density modules not included in this kit.
أبرز المميزات
- 576 GB total capacity from 12 modules of 48 GB each for maximum server density
- DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SSF motherboard's memory slots
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
Should I pick the 12-module 576GB kit or a smaller capacity for my Supermicro H13SSF?
The 576GB kit provides 12 matched 48GB modules; choose it when your board's population rules allow all slots to be filled at DDR5-5600 speed.
What does the DDR5-5600 rating mean once the kit is installed in the server?
The modules run at 5600 MT/s with CL46 latency at 1.1V, delivering the full PC5-44800 bandwidth the memory controller expects.
How does the 288-pin RDIMM interface affect performance on the H13SSF?
The registered 288-pin DDR5 RDIMM interface buffers address and command signals, letting all 12 slots operate at rated speed without loading the controller.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
