SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00495769BTC
متوفر
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 ECC Registered RDIMM CL46 1.1V 2Rx8 Supermicro H13DSG-O-CPU memory upgrade
A 64 GB DDR5-5600 ECC registered RDIMM kit (2×32 GB, CL46, 1.1 V, 2Rx8) validated for the Supermicro H13DSG-O-CPU motherboard
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 64 GB capacity from two 32 GB modules for dense server workloads
- DDR5 5600 speed with CL46 latency for high-throughput memory performance
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 1 V operation reduces power draw in enterprise environments
- 288-pin RDIMM form factor validated for Supermicro H13DSG-O-CPU motherboard
64GB DDR5-5600 Registered ECC Kit
This 64GB kit contains two 32GB DDR5-5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13DSG-O-CPU memory controller expects. It is intended for administrators upgrading or populating that specific server platform with validated modules.
DDR5 Registered DIMM Constraints
The 288-pin RDIMM form factor is required by the motherboard; UDIMM or SODIMM modules will not fit or function. Registered architecture buffers the command bus so every slot can run fully populated at the rated 5600 MT/s, while on-die ECC corrects single-bit errors before they reach the operating system.
Replaces Lower-Capacity or Unvalidated Modules
Swapping out smaller RDIMMs or unqualified memory with this matched 2Rx8 kit restores full rated throughput and eliminates population-rule conflicts. The jump is worth it when the workload demands maximum supported capacity per channel and the stability of vendor-verified ECC operation.
أبرز المميزات
- 64 GB capacity from two 32 GB modules for dense server workloads
- DDR5 5600 speed with CL46 latency for high-throughput memory performance
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 1 V operation reduces power draw in enterprise environments
- 288-pin RDIMM form factor validated for Supermicro H13DSG-O-CPU motherboard
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
Should I pick the 64GB kit with two 32GB modules or a single 32GB stick for my Supermicro H13DSG-O-CPU?
The kit supplies two 32GB RDIMMs for 64GB total. Using both modules lets the board run dual-channel and reach the full rated capacity, while a single stick would leave half the bandwidth unused.
What does the DDR5-5600 rating actually deliver once the memory is installed in this server?
The modules run at 5600 MT/s with CL46 timing at 1.1V, giving the memory controller the exact speed and latency it expects for stable full-capacity operation.
How does the 288-pin RDIMM interface limit what I can do with this memory?
The 288-pin Registered DIMM form factor fits only RDIMM slots on the H13DSG-O-CPU; it cannot be used in UDIMM or SODIMM sockets and requires the board's registered-memory population rules.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
