نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green DDR5 UDIMM sticks in a set, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 CL42 1Rx8 ECC UDIMM 1.1V

SKU CH-STF6-KT0E3

A 64 GB kit of four 16 GB DDR5 ECC UDIMM modules running at 5600 MT/s with CL42 latency at 1.1 V

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCYes

Capacity 64GB (4 x 16GB)

Rank 1Rx8

  • 64 GB total capacity across four 16 GB modules
  • DDR5 5600 MT/s speed for high-throughput server workloads
  • CL42 CAS latency tuned for stable ECC operation
  • 10 V low-voltage design reduces power draw per module
  • 288-pin unbuffered UDIMM with on-die ECC for data integrity

64GB DDR5 ECC UDIMM kit

This NEMIX RAM kit provides 64GB of DDR5 memory across four 16GB unbuffered UDIMM modules. It is built for servers and workstations that require error-correcting code protection for data integrity. The modules operate at 5600MHz with a CL42 latency and a low 1.10V voltage. IT professionals choose this memory for mission-critical environments where stability is essential.

288-pin DDR5 motherboard compatibility

Each module uses the standard 288-pin DDR5 form factor and fits compatible server or workstation motherboards that support unbuffered ECC UDIMMs. The 1Rx8 single-rank organisation helps maintain signal integrity across all four slots. No heat spreaders are fitted, so the modules occupy minimal vertical space inside crowded chassis. Builders must verify their platform supports DDR5 ECC unbuffered memory before installation.

Sustained load stability testing

Every module undergoes rigorous stress testing under load to confirm reliability during continuous operation. The combination of major OEM chips from Samsung, Micron or Hynix and the 1.10V operating voltage supports consistent throughput without thermal throttling. ECC functionality corrects single-bit errors in real time, preventing data corruption during long compute tasks. This kit is not suited for platforms that require registered or load-reduced DIMMs.

أبرز المميزات

  • 64 GB total capacity across four 16 GB modules
  • DDR5 5600 MT/s speed for high-throughput server workloads
  • CL42 CAS latency tuned for stable ECC operation
  • 10 V low-voltage design reduces power draw per module
  • 288-pin unbuffered UDIMM with on-die ECC for data integrity

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 NON-ECC Unbuffered SODIMM
Part NumberME44800-618K4X
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL42
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How long can the 1.10 V voltage hold before thermal throttling kicks in?

The kit runs at a fixed 1.10 V; DDR5 modules do not expose a throttling threshold in their specifications.

Does the 288-pin UDIMM generate audible noise under continuous load?

Memory modules have no moving parts, so they produce no audible noise regardless of load duration.

What motherboard feature must already be present for this 5600 CL42 ECC UDIMM kit to function?

The board must provide 288-pin DDR5 slots that support ECC unbuffered operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.