نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM for Supermicro X14SDW-64C-SP9F memory upgrade

SKU CH-F0AX-C2XWR

64 GB DDR5-5600 registered ECC RDIMM built for the Supermicro X14SDW-64C-SP9F

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

عرض 4 تكوينات إضافية
  • Full 64 GB capacity recognised at rated 5600 MHz speed
  • Registered ECC design corrects single-bit errors preventing silent data corruption
  • 2Rx4 rank and 1.1 V voltage match controller expectations exactly
  • 288-pin RDIMM form factor fits Supermicro X14SDW-64C-SP9F slots
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade stability

Exact-match DDR5 upgrade

This 64GB DDR5 5600MHz module is built as a direct replacement for the Supermicro X14SDW-64C-SP9F motherboard. It uses the 288-pin RDIMM form factor that the board requires and matches the 2Rx4 rank, 1.1V voltage and CL46 timing the memory controller expects. The registered ECC design lets the system run fully populated at rated speed while correcting single-bit errors on the fly.

Thermals and power

Operating at 1.1V, the module draws minimal power and runs without a heat spreader in typical server airflow. Registered buffering reduces electrical load on the memory controller, keeping temperatures stable even when all slots are filled. The low-voltage DDR5 design limits heat output during sustained workloads.

Build and daily use

Major OEM chips from Samsung, Micron or Hynix provide enterprise-grade reliability in a bare-DIMM package that fits standard 288-pin slots. The registered form factor means it will not work in boards that only accept unbuffered UDIMMs, so verify your platform before ordering. Lifetime replacement coverage and US-based technical support are included.

أبرز المميزات

  • Full 64 GB capacity recognised at rated 5600 MHz speed
  • Registered ECC design corrects single-bit errors preventing silent data corruption
  • 2Rx4 rank and 1.1 V voltage match controller expectations exactly
  • 288-pin RDIMM form factor fits Supermicro X14SDW-64C-SP9F slots
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade stability

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install this 288-pin DDR5 RDIMM in my Supermicro X14SDW-64C-SP9F and what step is often missed?

Power down, open the chassis, and insert the module into the correct DIMM slot following the motherboard's population order; the step most often missed is consulting the manual to confirm which slot must be populated first for the 2Rx4 registered ECC configuration to be recognised at full 64GB capacity.

What maintenance or replacement will this 64GB DDR5 5600MHz CL46 ECC Registered RDIMM need over time?

No routine maintenance is required; the module has no heat spreader and operates at 1.1V, so replacement is only necessary if a DIMM fails, at which point the lifetime replacement warranty covers a direct swap.

What limit appears first when this 2Rx4 1.1V DDR5 RDIMM runs sustained workloads on the X14SDW-64C-SP9F?

The memory controller's maximum supported capacity per channel and the board's qualified voltage limit of 1.1V are reached before thermal throttling, since the module lacks a heat spreader and relies on chassis airflow to stay within spec.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.