نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 6400 CL52 4Rx4 1.1V ECC RDIMM Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-7QMD-ZEA01

64GB DDR5-6400 ECC RDIMM with CL52 latency, 1.1V operation, 4Rx4 registered design for Supermicro X14SDW-40C-SP9F servers

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB

  • Exact DDR5-6400 CL52 1.10V spec ensures full-speed recognition
  • 4Rx4 registered ECC design maintains stability with all slots populated
  • 288-pin RDIMM form factor matches Supermicro X14SDW-40C-SP9F requirements
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR5-6400 upgrade

This 64GB DDR5 RDIMM runs at 6400MHz (PC5-51200) with CL52 latency at 1.1V. Registered ECC and 4Rx4 organisation provide the signal integrity and error correction required by enterprise server workloads.

Verify board population rules

Confirm the Supermicro X14SDW-40C-SP9F manual for supported capacity per slot, approved DIMM order, and any BIOS version requirements before installation. The module is a 288-pin Registered RDIMM; it will not fit UDIMM or SODIMM slots.

Suits full-capacity server builds

Ideal for administrators populating every slot on the named motherboard at rated speed with registered ECC stability. Not suited for desktop boards that require unbuffered UDIMMs, for systems limited to lower-density ranks, or for any platform that does not accept DDR5 RDIMMs.

أبرز المميزات

  • Exact DDR5-6400 CL52 1.10V spec ensures full-speed recognition
  • 4Rx4 registered ECC design maintains stability with all slots populated
  • 288-pin RDIMM form factor matches Supermicro X14SDW-40C-SP9F requirements
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability
  • Lifetime replacement warranty with US-based technical support included

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the kit include only the 64GB DDR5 6400 CL52 288-pin ECC RDIMM module or are cables or brackets also supplied?

The package contains the single 64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-PIN ECC Registered RDIMM module. No cables, brackets or additional accessories are included.

Should I choose a different rank or voltage version for the Supermicro X14SDW-40C-SP9F board?

This module is the exact-match 4Rx4 1.1V Registered ECC RDIMM specified for the X14SDW-40C-SP9F. Other ranks or voltages are not supported by this motherboard.

Will the rated 6400 MT/s speed be active immediately after installation in the Supermicro X14SDW-40C-SP9F?

Yes, the module's 6400MHz PC5-51200 CL52 1.1V profile matches the board's memory controller requirements, so it will be recognised at full capacity and run at its rated speed.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.