NEMIX RAM
NEMIX RAM 4GB DDR3 1600 PC3-12800 1.35V 204-Pin SODIMM for Apple 2012 Mac Mini 6,1 6,2 memory upgrade
- 4GB
- DDR3 1600 (PC3 1280…
21.99 US$
0.00028305BTC
متوفر
NEMIX RAM
NEMIX RAM 8GB (2x4GB) DDR3 1600 1.35V 204-pin SODIMM memory upgrade for Apple 2012 Mac Mini 6,1 6,2
8GB dual-channel DDR3 SODIMM kit at 1600 MHz with 1.35V low voltage for 2012 Mac Mini models
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1600 (PC3 12800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
Capacity 8GB 2X4GB
- 4GB
- 8GB 2X4GB
- 8GB dual-channel kit boosts multitasking on 2012 Mac Mini 6,1 and 6,2
- DDR3 1600 MHz PC3-12800 speed matches factory specification
- Low 1.35 V operation reduces power draw and heat
- 204-pin SODIMM form factor fits directly into the memory slots
- Built with major OEM chips from Samsung, Micron or Hynix for reliability
8GB DDR3 kit for 2012 Mac Mini
This 8GB kit contains two 4GB SODIMM modules built to the DDR3 1600 standard at 1.35V. It is engineered specifically for the Apple Mac Mini models 6,1 and 6,2 released in 2012. The unbuffered, non-ECC design matches the original system requirements for these compact desktops.
Upgrade from 4GB or mismatched modules
Replacing the factory 4GB configuration or a mixed-capacity set with this matched pair enables dual-channel operation. The jump is worthwhile when the system shows memory pressure during multitasking, virtual machines or large browser sessions. It restores the headroom the original specification intended for these models.
8GB total capacity with CL11 timing
The kit provides 8GB of addressable memory, which handles typical productivity workloads and moderate creative tasks on the supported Mac Mini platforms. Headroom diminishes when running multiple virtual machines, heavy video timelines or large dataset processing that exceed the 8GB ceiling. The CL11 latency and 1600MHz speed operate within the platform's native memory controller limits.
أبرز المميزات
- 8GB dual-channel kit boosts multitasking on 2012 Mac Mini 6,1 and 6,2
- DDR3 1600 MHz PC3-12800 speed matches factory specification
- Low 1.35 V operation reduces power draw and heat
- 204-pin SODIMM form factor fits directly into the memory slots
- Built with major OEM chips from Samsung, Micron or Hynix for reliability
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | Apple iMac/Mac Mini Compatible Series Memory |
| Model | Apple DDR3 1600MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS12800-428K2 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Apple |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (2X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
إصدارات أخرى من هذا الطراز
1 أخرى من الفئة نفسها
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
أسئلة حول هذا المنتج
Does the 204-pin DDR3 SODIMM form factor fit the memory slots in a 2012 Mac Mini 6,1 or 6,2?
Yes, the kit uses the 204-pin DDR3 SODIMM form factor that matches the slots in the 2012 Mac Mini 6,1 and 6,2.
What is the correct orientation step when inserting the modules so the notch aligns with the slot key?
Hold each module by the edges, line up the notch with the slot key, insert at a slight angle, then press down firmly until the side clips click into place.
Will the Samsung, Micron or Hynix chips on these modules need any firmware updates or periodic replacement?
No, the memory chips do not require firmware updates or scheduled replacement; they are solid-state components rated for the life of the system.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00276732BTC
متوفر
