نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 SODIMM POSIFLEX RT-2016 memory upgrade

SKU CH-5NH2-WG0RQ

8GB DDR3 1333 SODIMM upgrade for POSIFLEX RT-2016 terminal, 1.35V non-ECC unbuffered

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB capacity boosts terminal responsiveness
  • DDR3 1333 MHz speed matches POSIFLEX RT-2016 specs
  • 35 V low-voltage operation cuts power draw
  • 204-pin SODIMM form factor fits the system slot
  • Non-ECC unbuffered design ensures stable POS performance

POSIFLEX RT-2016 memory upgrade

This 8 GB DDR3 SODIMM is built specifically for the POSIFLEX RT-2016 terminal. It delivers a direct-fit module for point-of-sale and kiosk systems that require reliable operation. The single 8 GB stick installs without adapters or configuration changes.

Upgrading from lower capacity

Replacing a 2 GB or 4 GB module with this 8 GB part doubles or quadruples available memory. The jump is worthwhile when the terminal runs multiple POS applications, local databases or background services that exceed the original RAM. Systems already at 8 GB will not benefit from adding another stick.

Suited for POS terminal owners

This module suits IT staff maintaining POSIFLEX RT-2016 units that need more headroom for daily workloads. Builders assembling custom hardware, laptop users or anyone needing ECC, registered DIMMs or DDR5 memory should look elsewhere.

أبرز المميزات

  • 8 GB capacity boosts terminal responsiveness
  • DDR3 1333 MHz speed matches POSIFLEX RT-2016 specs
  • 35 V low-voltage operation cuts power draw
  • 204-pin SODIMM form factor fits the system slot
  • Non-ECC unbuffered design ensures stable POS performance

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

Does the 204-pin SODIMM fit the POSIFLEX RT-2016 terminal?

Yes, the 204-pin DDR3 SODIMM is built for the POSIFLEX RT-2016 and matches the system's memory slot exactly.

How do I install the module and what step is often missed?

Power off the terminal, open the memory cover, insert the SODIMM at an angle then press down until both side clips click — the click is the step people skip.

Will the 1.35 V module need a voltage change later?

No, the module runs at 1.35 V and is compatible with the terminal's standard voltage; no adjustment or replacement is required during its service life.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.