نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz POSIFLEX XT-5315 JIVA memory upgrade

SKU CH-CSYM-1AMEC

8GB DDR3 1333MHz SODIMM upgrades POSIFLEX XT-5315 JIVA terminal memory with CL9 timing

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits XT-5315 JIVA slot
  • Major OEM chips deliver tested reliability

8GB DDR3 SODIMM for POSIFLEX XT-5315 JIVA

This 8GB DDR3 1333MHz SODIMM module is built specifically for the POSIFLEX XT-5315 JIVA foldable 15-inch terminal. It uses a 204-pin unbuffered non-ECC design with 2Rx8 organisation and CL9 latency. The module operates at 1.35V low voltage while maintaining PC3-10600 speed rating. It targets technicians upgrading memory in this exact point-of-sale system.

Replaces factory memory in the XT-5315 JIVA terminal

The upgrade replaces the original memory module installed in the POSIFLEX XT-5315 JIVA. The jump is worth it when the terminal shows slowdown during multi-application workloads or when the current capacity limits simultaneous tasks. Installation follows the terminal's own service guide and takes minutes. No other system compatibility is claimed or implied by this module.

Verify the terminal model is XT-5315 JIVA before

Check that the unit is the foldable 15-inch POSIFLEX XT-5315 JIVA terminal and not a similar-looking variant. Confirm the motherboard accepts 204-pin DDR3 SODIMMs with 1.35V operation and 2Rx8 density. Ensure the memory slot is accessible and not soldered. The module uses major OEM chips from Samsung Micron or Hynix but carries no heat spreader.

أبرز المميزات

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits XT-5315 JIVA slot
  • Major OEM chips deliver tested reliability

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

Will the 204-pin SODIMM fit the POSIFLEX XT-5315 JIVA memory slot?

Yes, the module is a 204-pin DDR3 SODIMM designed for the POSIFLEX XT-5315 JIVA terminal.

How do I install this DDR3 module in the POSIFLEX XT-5315 JIVA?

Power off the terminal, open the memory compartment, align the notch on the 204-pin SODIMM, insert at an angle, then press down until the clips lock.

Does the 1.35V DDR3 module need replacement after a certain period?

No, the memory has no moving parts and requires no scheduled replacement under normal use.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.