نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1600 ECC UDIMM 1.35V 240-Pin Dell PowerEdge R515

SKU CH-7TTD-P2M0M

An 8 GB DDR3 1600 ECC UDIMM running at 1.35 V for Dell PowerEdge R515 servers

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 8GB capacity boosts server multitasking with DDR3 1600 speed
  • ECC protection prevents data errors in critical workloads
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits Dell PowerEdge R515 directly
  • Built with major OEM chips for proven reliability

Dell PowerEdge R515 memory upgrade

This 8 GB DDR3 1600 ECC UDIMM module is built for the Dell PowerEdge R515 server. It runs at 1.35 V with a CL11 latency and uses a 2Rx8 chip organisation on a 240-pin unbuffered stick.

IT teams maintaining R515 fleets

Administrators who need validated ECC memory for existing Dell PowerEdge R515 systems will find this module a direct fit. Buyers running newer DDR5 platforms or non-Dell hardware cannot use this DDR3 form factor.

DDR3 1600 ECC UDIMM specification

The single specification that decides compatibility is the DDR3 1600 ECC UDIMM 1.35 V 240-pin interface. Only systems that accept this exact memory type will recognise and run the module.

أبرز المميزات

  • 8GB capacity boosts server multitasking with DDR3 1600 speed
  • ECC protection prevents data errors in critical workloads
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits Dell PowerEdge R515 directly
  • Built with major OEM chips for proven reliability

المواصفات

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR3 1600MHZ ECC Unbuffered UDIMM
Part NumberME12800-828K1
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemDell
CAS LatencyCL11
Heat SpreaderNo
Type240-Pin DDR3 ECC UDIMM
Rank2Rx8
FeaturesDDR3 1600MHZ ECC UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 240-PIN ECC Unbuffered UDIMM

أسئلة حول هذا المنتج

How can I verify the 8GB DDR3 1600 ECC UDIMM is detected and running at PC3-12800 CL11 after installing it in my PowerEdge R515?

Enter the system BIOS or UEFI on boot and confirm the memory information screen shows 8GB total, 1600MT/s speed, ECC enabled, 1.35V voltage and CL11 timings for the installed DIMM.

What exactly ships in the box and are any extra parts or cables required for installation?

The package contains one 8GB 2Rx8 240-pin DDR3 ECC UDIMM module only; no heat spreader, cables, brackets or tools are included and none are needed for a standard DIMM slot installation.

Which NEMIX RAM version should I select if my server needs a single 8GB 1.35V ECC UDIMM matching part SNP96MCTC/8G?

Choose the ME12800-828K1 model listed here; it is the 8GB 1X8GB DDR3 1600 PC3-12800 2Rx8 1.35V ECC UDIMM built for Dell PowerEdge R515 compatibility.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.