BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00278766BTC
متوفر
NEMIX RAM
NEMIX RAM 8GB DDR3 1600 PC3-12800 CL11 1.35V 240-Pin UDIMM Dell SNP66GKYC/8G A6994446
8GB DDR3 1600 desktop module runs at 1.35V with CL11 timing for Dell systems
- Capacity8GB
- Type240-Pin DDR3 UDIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 8 GB capacity lifts multitasking headroom
- DDR3 1600 speed feeds data at PC3-12800 bandwidth
- CL11 latency keeps response tight
- 35 V operation reduces power draw
- 240-pin UDIMM fits standard desktop slots
Dell-compatible DDR3 UDIMM
This 8 GB DDR3 module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 240-pin unbuffered non-ECC layout built with major OEM chips. The part matches Dell SNP66GKYC/8G and A6994446 for direct replacement in supported desktops.
Desktop upgraders and IT maintainers
Suits owners of compatible Dell systems needing a single 8 GB stick to fill a free slot or replace a failed module. Not suited for servers requiring ECC or registered memory, nor for platforms limited to 1.5 V DDR3 only.
Voltage decides compatibility
The 1.35 V rating means the module works in low-voltage DDR3 slots and often in standard 1.5 V slots, but systems that only accept 1.5 V may not support it. Check the motherboard manual before purchase.
أبرز المميزات
- 8 GB capacity lifts multitasking headroom
- DDR3 1600 speed feeds data at PC3-12800 bandwidth
- CL11 latency keeps response tight
- 35 V operation reduces power draw
- 240-pin UDIMM fits standard desktop slots
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR3 Desktop PC Memory Solutions |
| Part Number | MD12800-828K1 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 UDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
أسئلة حول هذا المنتج
Will this 8 GB DDR3 module fit my Dell system that lists part number SNP66GKYC/8G?
Yes, the module is built to match the Dell SNP66GKYC/8G and A6994446 part numbers for direct compatibility.
My motherboard only supports 1.35 V DDR3; will this kit run at that voltage?
The module is rated at 1.35 V, so it will operate within the low-voltage limit of your board.
Do I need to change any BIOS settings to run the memory at 1600 MHz CL11?
Most boards will detect the 1600 MHz CL11 profile automatically; if not, enable the standard DDR3 1600 setting in BIOS.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
