نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM for POSIFLEX XT-8317E JIVA memory upgrade

SKU CH-KTXV-PEMPP

An 8 GB DDR4 3200 SODIMM with CL22 latency and 1.2 V operation, built for POSIFLEX XT-8317E JIVA terminals

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency and 1.20 V operation keep power draw low
  • 260-pin SODIMM fits the POSIFLEX XT-8317E JIVA slot directly
  • 2Rx8 rank with major OEM chips ensures stable operation under load
  • Non-ECC unbuffered design simplifies installation for quick upgrades

Compatible POS Memory

This NEMIX RAM module is built for the POSIFLEX XT-8317E JIVA fanless point-of-sale terminal. It delivers 8 GB of DDR4 3200 memory in a single SODIMM so the system can handle transaction workloads without paging. The part is validated for that specific platform.

260-Pin SODIMM Build

The stick uses a standard 260-pin DDR4 SODIMM edge connector that fits the terminal's memory slot directly. It operates at 1.2 V with CL22 latency and a 2Rx8 rank structure using major OEM chips. No heat spreader is fitted, matching the fanless chassis design.

Upgrade From Lower Capacity

Replacing a smaller module with this 8 GB unit removes the memory bottleneck that slows checkout software and peripheral drivers. The jump is worthwhile when the terminal currently runs on 4 GB or less and shows sluggish response during peak periods.

أبرز المميزات

  • 8 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency and 1.20 V operation keep power draw low
  • 260-pin SODIMM fits the POSIFLEX XT-8317E JIVA slot directly
  • 2Rx8 rank with major OEM chips ensures stable operation under load
  • Non-ECC unbuffered design simplifies installation for quick upgrades

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

Does DDR4 3200 PC4-25600 CL22 run at its rated speed on the POSIFLEX XT-8317E JIVA?

The module is DDR4 3200 PC4-25600 CL22; the terminal's memory controller sets the final operating speed.

Will a 260-pin DDR4 SODIMM fit the POSIFLEX XT-8317E JIVA memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX XT-8317E JIVA fanless POS terminal.

How is the NEMIX RAM 8GB DDR4 SODIMM installed in the POSIFLEX XT-8317E JIVA, and what step is often missed?

Power off, open the terminal's memory cover, insert the 260-pin SODIMM at an angle until the clips snap, then replace the cover; skipping full power-off can prevent detection.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.