نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 288-pin DDR4 RDIMM module without heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 SuperMicro compatible memory upgrade

SKU CH-8TW4-2FJKV

8GB DDR4 3200 ECC registered DIMM, CL22 1.2V, validated for SuperMicro servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 3200 MHz DDR4 speed handles demanding server tasks
  • Registered design improves signal integrity for stability
  • 2 V operation reduces power draw in dense configs
  • 288-pin RDIMM form factor fits SuperMicro platforms

8GB DDR4 ECC RDIMM for SuperMicro servers

This 8GB registered DDR4 module runs at 3200 MT/s with CL22 latency and 1.20V operation. It is built for SuperMicro server and workstation platforms that require ECC registered memory. The single-rank 1Rx8 organisation uses major OEM chips from Samsung, Micron or Hynix. Buyers who need unbuffered UDIMMs or higher capacities per slot cannot use this module.

Fits SuperMicro DDR4 RDIMM slots

The 288-pin RDIMM form factor installs directly into compatible SuperMicro motherboards without adapters. Registered buffering reduces electrical load on the memory controller, freeing the platform to populate more slots per channel. Systems that only accept unregistered UDIMMs or demand a different pin layout will not accept this part.

Low-voltage registered operation

At 1.20V the module draws minimal power for an 8GB registered DIMM. The absence of a heat spreader relies on chassis airflow for cooling, so adequate case ventilation is required. Silent operation is inherent because no active cooling is attached.

أبرز المميزات

  • ECC protection prevents data corruption in critical workloads
  • 3200 MHz DDR4 speed handles demanding server tasks
  • Registered design improves signal integrity for stability
  • 2 V operation reduces power draw in dense configs
  • 288-pin RDIMM form factor fits SuperMicro platforms

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

أسئلة حول هذا المنتج

How does the CL22 latency affect performance during sustained server workloads?

CL22 sets the CAS latency timing for this DDR4 3200 module; lower latency would respond faster but CL22 is standard for registered ECC memory at this speed

What thermal or power behaviour should be expected when this module runs continuously in a SuperMicro system?

The module operates at 1.20V without a heat spreader; registered ECC RDIMMs typically run cooler than high-performance unbuffered kits under sustained load

Which motherboard feature must the SuperMicro board provide for this 288-pin RDIMM to function?

The board must support DDR4 registered ECC memory with 288-pin RDIMM slots and be qualified for 1Rx8 modules at 3200 MT/s

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.