NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 1.2V 288-Pin UDIMM
- 8GB
- 288-Pin DDR4 UDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
8 GB DDR4 3200 ECC SODIMM with CL22 latency, 1.2 V operation and 1Rx8 organisation for servers and workstations
Capacity 8GB
This 8GB DDR4 3200 ECC SODIMM module is built for servers, workstations, NAS devices and compatible laptops that require error-correcting memory in the 260-pin form factor. It operates at 1.20V with CL22 latency and uses a single-rank 1Rx8 organisation with unbuffered signalling.
This module suits IT professionals upgrading ECC-capable systems where data integrity is essential and a single 8GB stick fits the available slot. Buyers whose platforms only accept non-ECC memory or require registered DIMMs will not be able to use this part. Systems limited to lower DDR4 speeds will still run the module at the highest supported frequency.
The 260-pin DDR4 ECC SODIMM interface with unbuffered operation and 1.20V voltage is the single specification that determines whether this module will install and function in a given system.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered SODIMM Memory |
| Part Number | MSE25600-818K1 |
| Capacity | 8GB |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes — the module uses the 260-pin DDR4 SO-DIMM form factor, matching the standard slot used in compatible laptops, servers and NAS units.
Align the notch with the slot key, insert at an angle, then press down evenly until the side clips click — do not force it straight down.
No firmware updates are needed; the module runs at 1.2 V with standard JEDEC timings, so it operates maintenance-free for its service life.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟