BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00277815BTC
متوفر
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600MHz CL46 1.1V 2Rx8 UDIMM for ASRock Rack W880D4U-2L2T
A 96GB dual-channel DDR5 kit with two 48GB unbuffered UDIMMs rated at 5600MHz CL46 and 1.1V, validated for the ASRock Rack W880D4U-2L2T motherboard
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB capacity with two 48 GB modules for high-density workloads
- DDR5 5600 MT/s speed rated at PC5-44800 for fast data throughput
- CL46 CAS latency at 1.1 V for efficient operation
- 2Rx8 dual-rank organisation on 288-pin UDIMM for broad platform support
- Validated compatibility with ASRock Rack W880D4U-2L2T motherboard
Targeted DDR5 kit for ASRock Rack workstations
This 96 GB kit consists of two 48 GB DDR5 modules built for the ASRock Rack W880D4U-2L2T motherboard. It delivers 5600 MT/s speed with CL46 latency at 1.1 V. The unbuffered, non-ECC UDIMM design suits workstations and desktop systems that require this specific validated configuration.
96 GB capacity with 5600 MT/s headroom
Two 48 GB 2Rx8 modules provide 96 GB total capacity for memory-intensive workloads such as virtualisation, content creation and large dataset handling. The PC5-44800 rating offers high throughput headroom. Systems needing registered ECC memory or speeds beyond 5600 MT/s will not be supported by this kit.
Standard voltage operation without heat spreaders
The modules run at the standard 1.10 V DDR5 voltage and rely on case airflow for cooling since no heat spreaders are fitted. In typical workstation chassis with adequate ventilation, thermals remain stable and acoustic impact is negligible. Power draw scales with the 96 GB density and 5600 MT/s data rate under sustained load.
أبرز المميزات
- 96 GB capacity with two 48 GB modules for high-density workloads
- DDR5 5600 MT/s speed rated at PC5-44800 for fast data throughput
- CL46 CAS latency at 1.1 V for efficient operation
- 2Rx8 dual-rank organisation on 288-pin UDIMM for broad platform support
- Validated compatibility with ASRock Rack W880D4U-2L2T motherboard
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
أسئلة حول هذا المنتج
Will the 5600MHz DDR5 kit run reliably with the existing 4800MHz DDR5 modules I keep in the ASRock Rack W880D4U-2L2T?
The kit is rated at 5600MHz CL46 1.1V; when mixed with slower DDR5 the system will operate all modules at the lowest common speed and voltage, so the 5600MHz sticks will downclock to match the 4800MHz set.
How can I verify the 2Rx8 48GB modules are detected at 5600MHz after installation?
Enter the BIOS on the ASRock Rack W880D4U-2L2T and confirm the memory frequency reads 5600 MT/s, the capacity shows 96GB across two slots, and the timings reflect CL46 at 1.1V.
What exactly ships in the MD44800-4828K2 package?
The box contains two 48GB 288-pin DDR5 UDIMM modules for a total of 96GB; no heat spreaders, cables, brackets or additional accessories are included.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
