نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips and gold edge connectors on a 288-pin DDR5 RDIMM module

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM memory upgrade

SKU CH-KV7B-1TEEP

96 GB DDR5 4800 registered ECC RDIMM, 2Rx4 CL40 at 1.1 V, 288-pin, validated for Supermicro X14SDV-20C-SP3F

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 4800 speed transfers data at PC5-38400 bandwidth
  • CL40 latency and 1.10 V voltage keep timing tight and power low
  • 2Rx4 registered ECC design corrects errors and stabilises full populations
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-20C-SP3F motherboard

Exact-match server upgrade

This NEMIX RAM module delivers 96GB of DDR5 4800 memory in a single 288-pin registered DIMM. It is built for the Supermicro X14SDV-20C-SP3F motherboard and runs at 1.1V with CL40 timing and 2Rx4 organisation.

Straightforward installation with one caveat

The DIMM seats in the standard 288-pin RDIMM slot and requires no extra cables or tools. The only common issue is ignoring the motherboard’s prescribed population order, which can prevent the system from recognising the full capacity.

Verify your board before ordering

Confirm that your Supermicro X14SDV-20C-SP3F manual lists 96GB registered ECC DIMMs as supported and shows the correct slot-filling sequence. The board must accept 2Rx4 registered modules at the rated voltage for the upgrade to function.

أبرز المميزات

  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 4800 speed transfers data at PC5-38400 bandwidth
  • CL40 latency and 1.10 V voltage keep timing tight and power low
  • 2Rx4 registered ECC design corrects errors and stabilises full populations
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-20C-SP3F motherboard

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How can I verify the 96GB DDR5 4800 CL40 2Rx4 RDIMM is running at its rated speed after installation?

Enter the server BIOS or use a tool such as dmidecode to confirm the modules report DDR5-4800 (PC5-38400), CL40, 1.1V, registered ECC, and the full 96GB capacity across the populated slots.

What ships in the box and is anything else required to install the memory in a Supermicro X14SDV-20C-SP3F?

The package contains the 96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V CL40 288-pin ECC RDIMM kit; no extra cables, brackets, or heat spreaders are needed — just follow the motherboard manual for correct DIMM population order.

Which NEMIX RAM DDR5 ECC RDIMM capacity and rank should I choose for the Supermicro X14SDV-20C-SP3F?

Select the 96GB 2Rx4 Registered ECC RDIMM (part MR38400-9624K1) that matches the board's DDR5-4800 PC5-38400 1.1V CL40 specification; other capacities or ranks are not covered by this verified fitment.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.