نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four bare green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 256GB 4x64GB DDR5 4800MHz CL40 ECC RDIMM memory upgrade

SKU CH-QBFP-YTQ7Z MPN CSE-GS7A-000NBP3

A 256 GB DDR5 registered ECC kit of four 64 GB modules running at 4800 MHz CL40 and 1.1 V, validated for Supermicro SuperWorkstation SYS-751A-I and X13DAI-T platforms

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from four 64 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM for data integrity in servers
  • CL40 CAS latency at 1.10 V operating voltage
  • Validated for Supermicro SuperWorkstation SYS-751A-I systems

System-specific DDR5 server kit

This 256GB kit contains four 64GB DDR5 4800MHz ECC registered DIMMs built for the SuperMicro SuperWorkstation SYS-751A-I. It targets IT professionals who need validated memory for mission-critical server and workstation workloads.

Registered ECC with 2Rx4 organisation

Each module runs at 1.1V with CL40 latency and a 2Rx4 rank structure, delivering error correction and signal buffering required by the compatible platform. The registered design reduces electrical load on the memory controller for stable operation at density.

Four-slot population fills the channel

The kit occupies four 288-pin DDR5 slots, completing a matched population for the validated SuperMicro X13DAI-T platform. Buyers who need a different capacity or non-ECC unbuffered memory should select an alternative kit.

أبرز المميزات

  • 256 GB total capacity from four 64 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM for data integrity in servers
  • CL40 CAS latency at 1.10 V operating voltage
  • Validated for Supermicro SuperWorkstation SYS-751A-I systems

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

أسئلة حول هذا المنتج

What does the 4800 MT/s rating mean once the kit is installed in a Supermicro SuperWorkstation SYS-751A-I?

The modules operate at DDR5 4800 speed with CL40 latency, delivering the rated PC5-38400 data rate when the platform runs memory at that frequency.

How does the 288-pin DDR5 RDIMM interface and registered design affect what the memory controller can do?

The 288-pin DDR5 RDIMM format with registered buffering places a register between the DRAM and the memory controller, reducing electrical load so the Supermicro X13DAI-T can populate all four slots at 4800 MT/s.

What physical clearance and slot layout does the 4 x 64 GB kit need inside the chassis?

Four 288-pin DDR5 RDIMM modules without heat spreaders fit the standard DIMM slots on the Supermicro X13DAI-T motherboard used in the SYS-751A-I.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.