نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR4 RDIMM sticks without heat spreaders, 288 pins, 256GB kit

NEMIX RAM

NEMIX RAM DDR4 ECC RDIMM 256GB (2x128GB) 3200MHz CL22 2Rx4 Registered Server Memory Upgrade

SKU CH-53FC-9H3HN

256 GB DDR4 ECC registered server memory kit in two 128 GB modules running at 3200 MHz with CL22 latency and 1.2 V operation

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 256GB 2X128GB

عرض 8 تكوينات إضافية
  • 256 GB capacity from two 128 GB modules lets you fully populate supported slots
  • DDR4 3200 speed rated at PC4-25600 delivers the bandwidth the memory controller expects
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 2 V operation at CL22 matches the voltage and timing the platform requires
  • Validated for Supermicro X12SPT-G and X12SPT-GC motherboards with 288-pin RDIMM form factor

Server Memory Kit

This 256 GB kit provides two 128 GB DDR4 registered DIMMs for Supermicro X12SPT-G and X12SPT-GC motherboards. The modules deliver ECC error correction and registered buffering so fully populated channels run at the rated 3200 MT/s without instability. It targets administrators who need maximum capacity per slot in supported Supermicro platforms.

Registered ECC Upgrade

Replacing unbuffered or lower-capacity DIMMs with this 2Rx4 registered kit lets the memory controller drive every slot at full speed and capacity. The jump is worth it when your workload demands the full 256 GB at PC4-25600 and the motherboard population rules call for registered modules rather than UDIMMs or SODIMMs.

Sustained Load Behaviour

Under continuous operation the registered architecture offloads electrical loading from the controller, while on-die ECC corrects single-bit errors before they affect data integrity. The 1.2 V CL22 timing profile remains stable across all populated slots, preventing the throttling or unplanned reboots that can occur with unbuffered configurations at this density.

أبرز المميزات

  • 256 GB capacity from two 128 GB modules lets you fully populate supported slots
  • DDR4 3200 speed rated at PC4-25600 delivers the bandwidth the memory controller expects
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 2 V operation at CL22 matches the voltage and timing the platform requires
  • Validated for Supermicro X12SPT-G and X12SPT-GC motherboards with 288-pin RDIMM form factor

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR4 3200MHz PC4-25600 2Rx4 1.2V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the 288-pin RDIMM modules fit the DIMM slots on my Supermicro X12SPT-G motherboard?

Yes, the kit uses the 288-pin Registered DDR4 form factor that the X12SPT-G and X12SPT-GC boards require; UDIMM or SODIMM modules will not fit.

What is the correct population order when installing both 128 GB sticks on the X12SPT-G?

Follow the motherboard manual's approved DIMM population sequence for dual-rank Registered ECC modules so the memory controller recognises the full 256 GB at 3200 MHz.

Does the absence of a heat spreader mean I need to add active cooling for these 2Rx4 modules?

The modules run at the standard 1.20 V DDR4 voltage and are designed for normal server airflow; no additional cooling is required beyond the chassis fans.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.