نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Sixteen green DDR5 RDIMM modules in a row, bare circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 1TB 16x64GB ECC RDIMM Supermicro H14DST-FL

SKU CH-M9BK-7XWZD

1TB kit of 16 registered ECC DDR5 modules at 4800 MHz, CL40, 1.1 V, 2Rx4, built for full-capacity stability on the Supermicro H14DST-FL motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

عرض 30 تكوينات إضافية
  • 1TB capacity with 16 matched 64GB modules
  • DDR5 4800 speed at CL40 latency for rated performance
  • ECC and registered design prevents data errors under load
  • 1V operation meets Supermicro H14DST-FL specifications
  • 288-pin RDIMM form factor fits the motherboard slots exactly

1TB DDR5 ECC RDIMM Kit for Supermicro H14DST-FL

This 1TB memory kit contains sixteen 64GB DDR5 4800 modules built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. Registered ECC architecture offloads the controller and corrects single-bit errors so fully populated slots run at rated speed without silent data corruption. The 288-pin RDIMM form factor matches the board's physical and electrical requirements precisely.

Who this suits and who should look elsewhere

Server administrators expanding a Supermicro H14DST-FL to its maximum supported capacity with validated DDR5 Registered ECC modules. Builders needing unbuffered UDIMMs, SODIMMs, lower-density kits or non-ECC memory for workstation or consumer platforms cannot use this kit. Systems that require a different DDR generation, voltage or pin layout are also incompatible.

The specification that decides fit

DDR5 4800 (PC5-38400) 2Rx4 Registered ECC at 1.1V CL40 in a 288-pin RDIMM is the single specification set the motherboard's memory population rules demand; if your system manual lists any other speed, rank, voltage or form factor, this kit will not be recognised or will not run at its rated settings.

أبرز المميزات

  • 1TB capacity with 16 matched 64GB modules
  • DDR5 4800 speed at CL40 latency for rated performance
  • ECC and registered design prevents data errors under load
  • 1V operation meets Supermicro H14DST-FL specifications
  • 288-pin RDIMM form factor fits the motherboard slots exactly

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What does the 4800 MT/s rating deliver once the kit is installed in a Supermicro H14DST-FL?

The 4800 MT/s rating means each module runs at the DDR5-4800 (PC5-38400) data rate the motherboard's memory controller expects, so all 16 slots operate at full rated speed without down-clocking.

How does the 288-pin RDIMM interface and registered design affect what the board can actually use?

The 288-pin RDIMM form factor matches the H14DST-FL's DIMM slots exactly; the registered (buffered) architecture lets the memory controller drive all 16 ranks at 1.1 V without signal degradation, which unbuffered UDIMMs cannot do.

What physical clearance and slot layout does the 16 x 64 GB kit require on the motherboard?

The kit fills all 16 DDR5 RDIMM sockets on the H14DST-FL; each module is a standard-height 288-pin RDIMM with no heat spreader, so it fits the board's native DIMM spacing and population order.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.