نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Six green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 6x32GB CL46 1.1V ECC RDIMM Supermicro H13SST-G memory upgrade

SKU CH-HS11-HV8P6

A 192GB kit of six 32GB DDR5 5600 CL46 1.1V ECC registered RDIMMs validated for the Supermicro H13SST-G motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

عرض 24 تكوينات إضافية
  • 192GB total capacity scales memory-intensive workloads across six 32GB modules
  • DDR5 5600 speed with CL46 latency matches the board's rated timing for full-speed operation
  • Registered ECC architecture offloads the controller and corrects single-bit errors to prevent data corruption
  • 10V operating voltage aligns with the platform's power envelope for stable fully-populated slots
  • 288-pin RDIMM form factor fits the Supermicro H13SST-G memory slots exactly

Exact-match upgrade for Supermicro H13SST-G

This 192GB kit delivers six 32GB DDR5 5600 RDIMMs built to the board's registered ECC specification. The 2Rx8 organisation, 1.1V operating voltage and CL46 timing match the memory controller's expectations so the full capacity is recognised at rated speed. It is intended for administrators who need a validated, single-SKU population for this specific platform.

Sustained-load behaviour

Registered buffering reduces electrical load on the memory controller, allowing all six slots to remain fully populated at 5600 MT/s without downclocking. ECC corrects single-bit errors in flight, preventing silent data corruption during long compute runs or virtualization workloads. The modules operate at the standard 1.1V DDR5 voltage, so thermal output stays within the server's designed cooling envelope.

Straightforward 288-pin RDIMM installation

Each module keys into the 288-pin DDR5 RDIMM sockets exactly as the motherboard manual illustrates; no heat spreaders interfere with adjacent DIMMs or CPU coolers. The most common issue is populating slots in an order the firmware does not support, which can halt POST or limit usable capacity. Consult the H13SST-G manual for the approved population sequence before seating the six DIMMs.

أبرز المميزات

  • 192GB total capacity scales memory-intensive workloads across six 32GB modules
  • DDR5 5600 speed with CL46 latency matches the board's rated timing for full-speed operation
  • Registered ECC architecture offloads the controller and corrects single-bit errors to prevent data corruption
  • 10V operating voltage aligns with the platform's power envelope for stable fully-populated slots
  • 288-pin RDIMM form factor fits the Supermicro H13SST-G memory slots exactly

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How much heat does the 1.1V DDR5-5600 kit produce when all six 32GB modules run continuously?

The 1.10V operating voltage and lack of a heat spreader keep thermal output low, but exact power draw depends on your Supermicro H13SST-G motherboard workload and airflow.

What must my Supermicro H13SST-G motherboard already support to accept this 192GB RDIMM kit?

The board needs six free 288-pin DDR5 RDIMM slots, registered ECC support, and a memory controller that handles 2Rx8 modules at DDR5-5600 CL46 per the manual.

Can I mix this 2Rx8 CL46 kit with older DDR5 RDIMMs that have different ranks or timings?

Mixing ranks or timings can prevent the server from posting or force all slots to the slowest common speed; populate all six slots with this matched kit for guaranteed stability.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.