نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Eight green DDR5 RDIMM sticks in a row, no heat spreaders, gold edge connectors visible

NEMIX RAM

NEMIX RAM DDR5 5600 1TB (8x128GB) ECC RDIMM Supermicro H13SSF memory upgrade

SKU CH-NBGB-JM9JV

Adds 1 TB of DDR5 ECC registered memory to a Supermicro H13SSF server in an 8 × 128 GB kit running at 5600 MT/s with CL46 latency and 1.1 V

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB capacity with eight 128GB modules for maximum server density
  • DDR5-5600 speed at CL46 latency for responsive data access
  • Registered ECC architecture corrects single-bit errors to prevent silent corruption
  • 1V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13SSF fitment

1 TB DDR5 ECC RDIMM kit for Supermicro H13SSF

This 1 TB kit contains eight 128 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It targets administrators who need the full memory capacity the H13SSF platform allows and require error correction for production workloads.

Upgrade from smaller or slower DDR5 RDIMM sets

Replacing a partial population with this eight-module kit lets every channel run at the rated 5600 MT/s speed and CL46 latency. The jump is worth it when your workloads exceed the current capacity or when mixed-rank configurations prevent the server from reaching its maximum supported speed.

Straightforward 288-pin RDIMM installation

Modules seat in the standard 288-pin DDR5 slots following the motherboard's population order. The most common issue is ignoring the manual's slot sequence, which can leave the system training at a lower speed or reporting less than the full 1 TB.

أبرز المميزات

  • 1TB capacity with eight 128GB modules for maximum server density
  • DDR5-5600 speed at CL46 latency for responsive data access
  • Registered ECC architecture corrects single-bit errors to prevent silent corruption
  • 1V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13SSF fitment

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

أسئلة حول هذا المنتج

Will the 288-pin RDIMM modules fit the Supermicro H13SSF motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM form factor, which matches the physical slot type required by the Supermicro H13SSF motherboard.

What is the correct installation order for the eight 128GB modules on the H13SSF board?

Populate all eight slots following the motherboard manual's DIMM population sequence; the registered 2Rx4 design allows full-capacity operation when every slot is filled.

When should the ECC registered RDIMMs be replaced in a production server?

Replace modules only if ECC logs report uncorrectable errors or the system experiences repeated memory-related faults; otherwise they are rated for continuous enterprise operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.