نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR5 RDIMM modules side by side, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 96GB 2x48GB RDIMM ECC GIGABYTE MZ33-AR1

SKU CH-1AR6-MB002

96 GB DDR5 5600 ECC registered RDIMM kit (2 × 48 GB, CL46, 1.1 V, 2Rx8) validated for the Gigabyte MZ33-AR1 motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

عرض 24 تكوينات إضافية
  • 96 GB capacity in a 2 × 48 GB kit lets you fully populate supported slots
  • DDR5 5600 (PC5-44800) speed matches the motherboard's rated memory frequency
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors on the fly
  • CL46 latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Validated for the GIGABYTE MZ33-AR1 so the 288-pin modules are recognised at full capacity

Exact-match DDR5-5600 RDIMM kit

This 96 GB kit consists of two 48 GB DDR5-5600 Registered ECC modules built to the precise 2Rx8 rank, 1.10 V voltage and CL46 timing the GIGABYTE MZ33-AR1 motherboard expects. It is intended for administrators who need the full capacity recognised at rated speed without manual tuning.

Thermals noise and power

The modules operate at the standard DDR5 1.10 V and carry no heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw predictable when all slots are populated.

Upgrade context

It replaces smaller or slower DDR5 RDIMM sets that limit total capacity or force down-clocking when fully populated. The jump is worth it when the workload demands 96 GB of error-correcting memory at the board's native 5600 MT/s rate and the population rules allow two 48 GB 2Rx8 modules.

أبرز المميزات

  • 96 GB capacity in a 2 × 48 GB kit lets you fully populate supported slots
  • DDR5 5600 (PC5-44800) speed matches the motherboard's rated memory frequency
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors on the fly
  • CL46 latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Validated for the GIGABYTE MZ33-AR1 so the 288-pin modules are recognised at full capacity

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install the 288-pin RDIMM kit in the GIGABYTE MZ33-AR1, and what step is often missed?

Power off the server, open the chassis, and insert each 48 GB module into the slots specified by the motherboard manual, pressing until the retention clips lock; the step most often missed is verifying the exact population order for a 2Rx8 registered kit so the memory controller initialises all 96 GB at DDR5-5600.

What maintenance or replacement will the registered ECC modules need over their service life?

Registered ECC RDIMMs have no moving parts and require no scheduled maintenance; replacement is only necessary if a module fails, which the lifetime warranty covers, or if a future capacity upgrade demands higher-density DIMMs.

What limit appears first when the kit runs sustained workloads at 5600 MT/s?

The primary limit is the DDR5-5600 data rate combined with CL46 latency at 1.1 V; the registered buffer and ECC logic maintain signal integrity across both 2Rx8 modules, so bandwidth and error correction remain stable before any thermal or voltage ceiling is reached.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.