SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00500332BTC
متوفر
NEMIX RAM
NEMIX RAM DDR5 6400 256GB 16x16GB ECC Registered RDIMM Supermicro H14DSG-O-CPU memory upgrade
256 GB kit of 16 registered ECC DDR5 RDIMMs at 6400 MT/s, CL52, 1.1 V, validated for the Supermicro H14DSG-O-CPU motherboard
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB capacity across 16 modules for dense server workloads
- DDR5-6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation at 1Rx8 rank for full-slot stability
- Verified fit for Supermicro H14DSG-O-CPU 288-pin RDIMM slots
Exact-match DDR5-6400 RDIMM kit for Supermicro
This 256GB kit contains sixteen 16GB DDR5-6400 (PC5-51200) registered ECC RDIMMs. Each module runs at 1.1V with CL52 latency and 1Rx8 organisation. The 288-pin RDIMM form factor matches the motherboard's memory-controller requirements for full-capacity recognition at rated speed.
Suited for servers needing maximum registered ECC
Ideal for administrators populating every slot on a Supermicro H14DSG-O-CPU board with validated registered ECC memory. Not suitable for systems that require unbuffered UDIMMs, SODIMMs, non-ECC modules, or a different DDR generation. Buyers needing lower capacities or alternative speeds should verify their platform's qualified-vendor list first.
Sixteen ranks deliver 256GB at DDR5-6400
The 1Rx8 registered design lets the memory controller drive all sixteen slots at the full 6400MT/s data rate with ECC protection. Headroom exists for heavily threaded workloads and large in-memory datasets. Capacity runs out when the application footprint exceeds 256GB or the platform's maximum supported memory per socket is lower than the installed total.
أبرز المميزات
- 256 GB capacity across 16 modules for dense server workloads
- DDR5-6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation at 1Rx8 rank for full-slot stability
- Verified fit for Supermicro H14DSG-O-CPU 288-pin RDIMM slots
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
What motherboard must I have for this 256GB DDR5-6400 ECC RDIMM kit to be recognised at full capacity?
The kit is verified for the Supermicro H14DSG-O-CPU motherboard; its memory controller expects 1Rx8 registered ECC modules at 1.1V with CL52 timing, and the board’s 288-pin RDIMM slots match the kit exactly.
Can I mix these 1.1V CL52 registered ECC RDIMMs with slower DDR5 modules already installed in the same H14DSG-O-CPU system?
The board will down-clock all populated slots to the slowest common speed and loosest timing, so every module must be rated for DDR5-6400 CL52 at 1.1V to keep the kit running at its rated 6400 MT/s.
After installation, how can I confirm the full 256GB kit is running at DDR5-6400 with ECC active?
Check the BIOS memory information screen or run a tool such as dmidecode; it should report 256GB total, 16 modules, speed 6400 MT/s, type DDR5, ECC enabled, and registered (buffered) operation.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
