BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00276429BTC
متوفر
NEMIX RAM
NEMIX RAM DDR5 6400 96GB (6x16GB) CL52 1.1V ECC RDIMM Supermicro H13SVW-NT memory upgrade
A 96 GB DDR5 ECC RDIMM kit of six 16 GB modules at 6400 MT/s with CL52 latency and 1.1 V operation, validated for Supermicro H13SVW-NT
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB total capacity from six 16 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency for high-throughput workloads
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 10 V operation reduces power draw while maintaining rated performance
- 288-pin RDIMM form factor matches Supermicro H13SVW-NT memory slots exactly
Exact-match DDR5 upgrade kit
This 96 GB kit delivers six 16 GB DDR5-6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SVW-NT memory controller expects. Each module runs at 1.1 V with CL52 latency and a 1Rx8 organisation so the board recognises full capacity at rated speed without manual tuning.
Thermals and power in normal use
Operating at the standard 1.1 V DDR5 voltage keeps power draw low across all six slots even when fully populated. The registered architecture buffers address and command signals reducing electrical load on the memory controller which helps maintain stable temperatures during sustained server workloads. No heat spreaders are fitted relying on chassis airflow for cooling.
Build fit and freedoms
The 288-pin RDIMM form factor matches the motherboard requirements exactly not a UDIMM or SODIMM so installation follows the board's documented population order. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots before they reach production. Registered buffering offloads the controller freeing headroom for maximum capacity configurations.
أبرز المميزات
- 96 GB total capacity from six 16 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency for high-throughput workloads
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 10 V operation reduces power draw while maintaining rated performance
- 288-pin RDIMM form factor matches Supermicro H13SVW-NT memory slots exactly
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H13SVW-NT and what step is often missed?
Power down, open the chassis, and seat each module in the exact slot order shown in the motherboard manual; the step most people skip is verifying the population sequence before locking the latches.
What maintenance or replacement will the 1Rx8 registered ECC kit need over its service life?
No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers it, and ECC continues correcting single-bit errors without user action.
What limit appears first when the 96 GB kit runs at 6400 MT/s under sustained load?
The memory controller’s maximum supported capacity and rank-per-channel limit governs sustained operation; the board manual defines the exact ceiling for a fully populated 6×16 GB configuration.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
