نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 64GB (4x16GB) 6400MHz CL52 1.1V ECC Registered RDIMM Supermicro H14DST-F memory upgrade

SKU CH-66WQ-00WSS

A 64GB DDR5 kit of four 16GB Registered ECC RDIMMs at 6400MHz CL52 1.1V, validated for the Supermicro H14DST-F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from four 16 GB modules
  • DDR5 6400 speed with CL52 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DST-F
  • Lifetime replacement warranty with US-based technical support

Supermicro H14DST-F memory upgrade

This 64GB kit is built specifically for the Supermicro H14DST-F motherboard, delivering four 16GB DDR5 RDIMM modules that match the board's registered ECC requirements. System administrators upgrading production servers receive the exact rank, voltage and timing the memory controller expects.

Registered ECC RDIMM 288-pin form factor

Each module uses a 288-pin registered design that buffers address and command signals so the memory controller stays stable when all slots are populated. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in always-on workloads.

1Rx8 organisation at 1.10V

The 1Rx8 layout and 1.10V operating voltage align with the platform's native DDR5-6400 specification, allowing the kit to run at its rated CL52 speed without manual tuning. Buyers needing modules without heat spreaders or seeking unbuffered UDIMM alternatives should verify their platform requirements first.

أبرز المميزات

  • 64 GB total capacity from four 16 GB modules
  • DDR5 6400 speed with CL52 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DST-F
  • Lifetime replacement warranty with US-based technical support

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

أسئلة حول هذا المنتج

Does DDR5 6400 PC5-51200 run at its rated speed on the H14DST-F?

The kit is spec-matched to the Supermicro H14DST-F memory controller, so the 6400 MT/s data rate and CL52 timings are recognised at full capacity when populated per the board rules.

Will these 288-pin RDIMMs fit the H14DST-F slots?

Yes, the 288-pin Registered RDIMM form factor is exactly what the H14DST-F requires; UDIMM or SODIMM modules would not seat in these slots.

What population order should I follow when installing the four 16 GB modules?

Consult the H14DST-F manual for the approved DIMM sequence; the board's population rules determine which slots must be filled first for full 64 GB operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.