نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 60mm square cooling fan 10mm thick 2-pin connector no LED

OEM Industries

OEM Industries 6010M12S 60mm 12V 0.12A 2-Pin CPU cooler

SKU CH-HPX5-M9KXK

A 60 mm sleeve-bearing fan runs on 12 V and 0.12 A through a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 60 mm frame fits tight builds
  • 12 V 0.12 A draw keeps power use low
  • 2-pin connector plugs straight into standard headers
  • Sleeve bearing runs quietly at idle
  • 10 mm thickness suits slim CPU coolers

Compact 60 mm fan for tight builds

The OEM Industries 6010M12S is a square 60 mm cooling fan that runs on 12 V and draws 0.12 A through a two-pin connector. Its sleeve bearing keeps the design simple and the profile slim at 10 mm thick. No LED lighting is fitted, so the unit stays visually neutral inside any chassis. It is sold as a fan only, without heatsink or mounting hardware.

Suits low-profile repairs and legacy slots

This fan fits builders who need a direct 60 mm replacement for an existing two-pin header on a graphics card, small-form-factor board or industrial enclosure. The two-wire interface provides power only, so speed reporting or PWM control is not available. Buyers who require variable speed control, a three- or four-pin header, or a taller airflow path should look elsewhere.

Moves air in confined spaces

At 60 mm the fan delivers focused airflow across voltage regulators, memory modules or compact GPU heatsinks where larger coolers cannot reach. The 12 V 0.12 A rating keeps power draw minimal for auxiliary cooling duties. In high-static-pressure scenarios such as dense radiator fins or restricted intake paths the sleeve-bearing motor will reach its limits quickly.

أبرز المميزات

  • Compact 60 mm frame fits tight builds
  • 12 V 0.12 A draw keeps power use low
  • 2-pin connector plugs straight into standard headers
  • Sleeve bearing runs quietly at idle
  • 10 mm thickness suits slim CPU coolers

المواصفات

Model6010M12S
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

أسئلة حول هذا المنتج

Does my motherboard need a 2-pin header to run the 6010M12S?

Yes, the fan uses a 2-pin power connector, so a matching 2-pin header on the board or an adapter is required.

Will the 60mm frame fit in the same mount as my old 60mm sleeve-bearing fan?

The 60mm square frame matches standard 60mm mounting holes, so it will bolt into the same positions as your existing 60mm fan.

How can I confirm the 6010M12S is spinning at the expected 12V 0.12A after installation?

Check the BIOS or monitoring software for a fan-speed reading on the connected header; a steady RPM signal shows the fan is receiving power and rotating.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.