نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Three 60 mm case fans with steel support brackets in two-tone finish

OEM Industries

OEM Industries D0625C48BYPP-10 48V 0.08A 3pcs CPU cooler

SKU CH-T52Q-F6FVT

Set of three 48 V 0.08 A case fans with steel supports for inverter, UPS or server cooling

  • Color2-Tone
  • TypeAccessories
  • Power ConnectorSee pic
  • LEDNo
  • Three 6025 servo fans per set for targeted airflow
  • 48 V 0.08 A low-power draw for server efficiency
  • Steel support brackets add rigid mounting stability
  • No LED lighting keeps rack environments distraction-free
  • D0625C48BYPP-10 model rated for inverter and UPS cooling

Three-fan kit for 48 V environments

This set contains three Servo 6025 D0625C48BYPP-10 fans built for 48 V 0.08 A operation. Each unit includes a steel support bracket for secure mounting in inverter, UPS or server chassis. The 2-tone finish distinguishes the fans visually while the plain power connector matches the pinout shown in the product image. No LEDs are fitted so the kit suits rack locations where indicator lights are unwanted.

Low current draw keeps thermals steady

At 0.08 A per fan the combined load stays modest on a 48 V rail, limiting heat contribution inside dense enclosures. Steel brackets transfer vibration to the chassis rather than amplifying it, helping keep acoustic output predictable during continuous duty. The absence of onboard lighting eliminates an extra heat source and removes a potential failure point in high-availability installations.

Bracket mounting frees internal space

Integrated steel supports let each fan bolt directly to frame rails or panel cut-outs without separate clips or trays. This reduces the hardware count and leaves more room for power modules or cabling in tight inverter and UPS layouts. Builders who need PWM speed control or a different voltage rail should verify the connector pinout against their control board before ordering.

أبرز المميزات

  • Three 6025 servo fans per set for targeted airflow
  • 48 V 0.08 A low-power draw for server efficiency
  • Steel support brackets add rigid mounting stability
  • No LED lighting keeps rack environments distraction-free
  • D0625C48BYPP-10 model rated for inverter and UPS cooling

المواصفات

ModelD0625C48BYPP-10
Color2-Tone
TypeAccessories
Power ConnectorSee pic
LEDNo

أسئلة حول هذا المنتج

How do I mount these 6025 D0625C48BYPP-10 fans with the steel supports and which way does the airflow go?

Use the included steel supports to secure each fan to the chassis mounting holes; the label side typically faces the exhaust direction, so orient the fan so air blows toward the rear or top of the case.

What maintenance will the 48V 0.08A servo fans need over time?

Dust the blades and frame every few months with compressed air; the sleeve-bearing motor is not user-serviceable, so replace a fan if it develops noise or speed drops.

What limit appears first when the three fans run continuously in a server or UPS enclosure?

The 48 V 0.08 A rating per fan sets a low power ceiling, so airflow drops off before the frame or wiring reaches thermal limits under sustained load.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.