نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black square 80 by 25 mm fan with three-pin connector

OEM Industries

OEM Industries MMF-08D24ES RM1 80x25mm 24V CPU cooler

SKU CH-00Y0-NBCH0

An 80 mm square 24 V inverter fan with dual ball bearings and a three-pin connector for YASKAWA and ABB PLCs

  • ColorBlack
  • TypeFan only
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • Original Melco manufacturing ensures industrial reliability
  • 80 mm square frame fits standard 80x25 mm mounting
  • 24 V 0.16 A rating matches YASKAWA PLC ABB inverters
  • Dual ball bearing design extends operational lifespan
  • Three-pin connector provides tachometer feedback for monitoring

80 × 25 mm 24 V inverter fan

This 80 mm square fan with a 25 mm thickness is built for 24 V industrial inverters such as YASKAWA PLC and ABB units. It draws 0.16 A through a three-wire, three-pin connector and uses a two-ball bearing for continuous operation. The black frame matches standard enclosure aesthetics and the unit ships new in original Melco packaging. Buyers who need a 12 V or PWM-controlled fan cannot use this model.

Sustained 24 V operation

The two-ball bearing design maintains consistent airflow during long duty cycles inside inverter cabinets. With a fixed 24 V supply the rotational speed stays stable without the voltage sag seen in shorter test runs. No LED or speed-reporting circuitry is present so the fan runs silently in the background. Installations that require variable speed control or tachometer feedback must look elsewhere.

Three-pin 24 V power connector

The sole electrical interface is a three-pin header delivering 24 V at 0.16 A. This connector determines whether the fan fits the target inverter board; no adapter or alternative wiring is included. Verify the pinout matches the CA1321-H01 specification before purchase. Systems using a different voltage or pin count will need a different cooling solution.

أبرز المميزات

  • Original Melco manufacturing ensures industrial reliability
  • 80 mm square frame fits standard 80x25 mm mounting
  • 24 V 0.16 A rating matches YASKAWA PLC ABB inverters
  • Dual ball bearing design extends operational lifespan
  • Three-pin connector provides tachometer feedback for monitoring

المواصفات

ModelMMF-08D24ES RM1
ColorBlack
TypeFan only
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

How much noise and heat does the 80 x 25 mm fan produce when running continuously on 24V?

The two-ball-bearing design keeps mechanical noise low during 24-hour operation, and the 0.16 A draw at 24 V means modest heat output inside the enclosure.

What power source and connector must I already have to run this 3-pin 24 V cooler?

You need a 24 V DC supply capable of at least 0.16 A and a standard 3-pin fan header or matching Molex-style connector.

Will this 80 mm square fan fit the mounting pattern on my older YASKAWA or ABB inverter?

The 80 x 25 mm frame matches the original Melco MMF-08D24ES RM1 footprint used on those legacy inverters, so it bolts straight in.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.