نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 80mm square frame fan with 25mm depth and 2-pin connector

OEM Industries

OEM Industries NYW08025024BSS 80mm 24V CPU cooler

SKU CH-HV4C-V39Q1 MPN NYW08025024BSS

An 80 mm 24 V ball-bearing fan with a 2-pin connector for targeted component cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • 24 V operation suits industrial and server chassis
  • 80 mm frame fits standard 8025 mounting holes
  • ball bearing design extends service life
  • 23 A draw keeps power demand low
  • two-pin connector enables simple installation

Compact 24 V 80 mm CPU cooler

This 80 mm fan-only cooler runs on a 24 V supply and draws 0.23 A through a two-pin connector. The ball-bearing motor is built for continuous operation inside industrial or embedded chassis. Black frame and blades keep the appearance neutral for rack or enclosure builds.

Sustained-load behaviour with ball bearing

Ball-bearing construction maintains consistent rotational speed during prolonged duty cycles without the wear patterns seen in sleeve designs. The two-wire layout delivers steady voltage to the motor so airflow remains stable across long operating periods. No onboard speed sensing means external monitoring must handle fan-fault detection.

Practical limits of the two-pin 24 V interface

A two-pin connector supplies power only, so the host system cannot modulate fan speed through PWM or read a tachometer signal. Voltage is fixed at 24 V, limiting direct use to platforms that provide that rail without additional regulation. Builders needing variable speed or RPM feedback must add external control circuitry.

أبرز المميزات

  • 24 V operation suits industrial and server chassis
  • 80 mm frame fits standard 8025 mounting holes
  • ball bearing design extends service life
  • 23 A draw keeps power demand low
  • two-pin connector enables simple installation

المواصفات

ModelNYW08025024BSS
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

أسئلة حول هذا المنتج

How loud is the 80 mm ball-bearing fan when running 24 V at 0.23 A all day?

The 8025 frame spins at 24 V drawing 0.23 A; ball bearings keep mechanical noise low and steady during continuous operation.

What power header must my system provide for the 2-pin connector on this cooler?

A 24 V two-pin header capable of supplying at least 0.23 A is required; no PWM or three-pin control is present.

Will the 80 mm footprint and 24 V two-pin interface fit the older industrial chassis I already use?

The 8025 dimensions and two-pin 24 V plug match legacy 80 mm mounts, so it drops into existing brackets without adapters.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.