OEM Industries
OEM Industries PLA08015S12HH CPU cooler 2-Tone 4 Pin 12V .35A
4-wire 12 V 0.35 A fan with orange blades and black frame for GTS450 GA82S2U video card
- Color2-Tone
- TypeFan only
- Power Connector4 Pin
- LEDNo
- 12 V 0.35 A power draw keeps energy use low
- 4-pin PWM connector enables precise speed control
- Two-tone orange blades on black frame add visual contrast
- Designed for GTS 450 GA82S2U video card fit
- Power Logic PLA08015S12HH model ensures correct replacement
Replacement fan for GTS 450 GA82S2U
This 12 V 0.35 A cooling fan is built specifically for the GTS 450 GA82S2U video card. The four-wire PWM connector allows the graphics card to control speed precisely. Orange blades on a black frame match the original two-tone look. It serves as a direct drop-in replacement when the stock cooler fails or becomes noisy.
Sustained airflow at constant PWM duty
Under continuous load the fan maintains a steady 12 V 0.35 A draw, so rotational speed does not droop as the motor warms. The four-wire interface lets the GPU firmware hold a fixed duty cycle instead of hunting between voltage steps. This keeps airflow stable during long gaming or compute sessions. No extra controller or software tuning is required.
Low noise and modest power draw in normal use
At typical desktop loads the fan runs at reduced PWM duty, drawing well under the rated 0.35 A and staying quiet. The black frame absorbs vibration that can amplify resonance in open cases. Power consumption stays minimal because the motor only receives the current demanded by the GPU curve. No LED lighting means no additional electrical load.
أبرز المميزات
- 12 V 0.35 A power draw keeps energy use low
- 4-pin PWM connector enables precise speed control
- Two-tone orange blades on black frame add visual contrast
- Designed for GTS 450 GA82S2U video card fit
- Power Logic PLA08015S12HH model ensures correct replacement
المواصفات
| Model | PLA08015S12HH |
|---|---|
| Color | 2-Tone |
| Type | Fan only |
| Power Connector | 4 Pin |
| LED | No |
أسئلة حول هذا المنتج
How loud does the PLA08015S12HH fan get when it runs continuously at 12V .35A?
The fan draws 12V at .35A through its 4-pin connector, so noise scales with the PWM duty cycle you set; at full duty it spins at its rated speed, and at lower duty it runs quieter.
What must my graphics card already have to accept this PLA08015S12HH replacement fan?
Your card needs a 4-pin header wired for 12V .35A and the same mounting hole pattern as the original gts450 ga82s2u cooler.
Will the 4-wire PLA08015S12HH work on an older card that only offers a 3-pin fan header?
The 4-pin plug fits a 3-pin header, but you lose PWM control; the fan then runs at full 12V .35A constantly, which may be louder than intended.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



