نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Frameless brown and transparent fan with eleven blades

OEM Industries

OEM Industries T127010SL 12V 0.18A 11 blade frameless fan

SKU CH-E3CV-7BXKN

A 12 V, 0.18 A frameless fan with 11 blades and a 3-pin connector for graphics-card cooling

  • Color2-Tone
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector3 Pin
  • LEDNo
  • 11 blades move air efficiently through open frame
  • 12 V 0.18 A keeps power draw low for graphics cards
  • 3-pin connector enables simple motherboard or GPU header install
  • Sleeve bearing runs quietly during light cooling loads
  • Two-tone brown and transparent design fits custom builds

Replacement GPU Fan for Tight Spaces

The OEM Industries T127010SL is a frameless 12 V fan built to mount directly on a graphics card heatsink. Its 11 brown-and-transparent blades move air without a surrounding frame, suiting repair jobs where a standard shrouded fan will not fit.

Fits 3-Pin Headers and Low-Current Budgets

The three-pin connector plugs into any 3-pin header on the card or motherboard, drawing just 0.18 A at 12 V. Sleeve bearings keep the assembly simple, while the frameless body frees up millimetres of clearance around neighbouring components or backplates.

No LEDs, No Software, Just the Fan

The package contains only the bare fan unit — no lighting, no PWM controller and no mounting hardware beyond the existing screw holes on your cooler. Installers reuse the original fasteners, so the repair adds no extra parts to track or configure.

أبرز المميزات

  • 11 blades move air efficiently through open frame
  • 12 V 0.18 A keeps power draw low for graphics cards
  • 3-pin connector enables simple motherboard or GPU header install
  • Sleeve bearing runs quietly during light cooling loads
  • Two-tone brown and transparent design fits custom builds

المواصفات

ModelT127010SL
Color2-Tone
TypeFan only
Bearing TypeSleeve Bearing
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

What is the maximum current draw the 12 V rail must sustain for this fan?

The motor is rated at 0.18 A on a 12 V supply, so the rail needs to provide at least that much current continuously.

How audible is the sleeve-bearing fan during continuous operation?

Sleeve bearings run quieter than ball bearings at low speed, but they can develop a faint whine after extended use; the 11-blade design keeps airflow steady without extra turbulence.

Does the three-pin connector fit a standard motherboard or graphics-card header?

Yes, the 3-pin plug matches common 12 V fan headers on motherboards and many VGA coolers; no PWM wire is present, so speed control is voltage-based.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.