نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green DDR3 RDIMM modules, 240-pin, no heat spreaders

OWC

OWC 128GB (4x32GB) DDR3 1600 PC3-12800 CL11 4Rx4 240-pin 1.5V ECC Registered RDIMM memory upgrade

SKU CH-HNZ3-C1SM4

A 128GB kit of four 32GB DDR3 1600 ECC registered RDIMMs for compatible Supermicro workstation and server motherboards

  • Capacity128GB (4 x 32GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 128GB (4 x 32GB)

  • ECC registered design protects data integrity in servers
  • 128 GB total capacity across four 32 GB modules enables heavy workloads
  • DDR3 1600 speed with CL11 latency delivers responsive performance
  • Validated for Supermicro H8 and X9DA7 motherboards ensures compatibility
  • JEDEC and RoHS compliant construction guarantees reliable operation

Server Memory Kit

This OWC kit supplies 128GB of DDR3 ECC registered memory across four 32GB modules. It is built for Supermicro H8DGG, H8QG6, H8QGI, H8SGL and X9DA7 motherboards that require registered DIMMs. The modules run at 1600MHz with CL11 latency and 1.5V operation.

Compatibility Focus

Suitable for administrators upgrading or populating the listed Supermicro server and workstation platforms. Not for standard desktop PCs, consumer laptops or any system that accepts only unbuffered memory. Builders needing unbuffered DDR3 or a different pin count should look elsewhere.

Registered ECC Requirement

The decisive specification is the registered ECC RDIMM design combined with 4Rx4 organisation. Only motherboards that explicitly support registered DDR3 ECC modules can use this kit; unbuffered-only boards will not recognise it.

أبرز المميزات

  • ECC registered design protects data integrity in servers
  • 128 GB total capacity across four 32 GB modules enables heavy workloads
  • DDR3 1600 speed with CL11 latency delivers responsive performance
  • Validated for Supermicro H8 and X9DA7 motherboards ensures compatibility
  • JEDEC and RoHS compliant construction guarantees reliable operation

المواصفات

BrandOWC
Part Number1R6D34R4128S
Capacity128GB (4 x 32GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard H8DGG Series
Supermicro Motherboard H8QG6 Series
Supermicro Motherboard H8QGI Series
Supermicro Motherboard H8SGL Series
Supermicro Motherboard X9DA7 Series

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the 240-pin DDR3 RDIMMs fit the DIMM slots on my Supermicro H8DGG board?

Yes, the kit uses the standard 240-pin DDR3 RDIMM form factor that matches the registered DIMM slots on the listed Supermicro H8DGG, H8QG6, H8QGI, H8SGL and X9DA7 series motherboards.

What is the correct way to install the four 32 GB modules so the server recognises the full 128 GB?

Populate the DIMM slots in the order specified by the motherboard manual for quad-channel registered memory, seating each 240-pin module until the ejector clips click; the common mistake is mixing these registered DIMMs with unbuffered memory, which prevents boot.

How can I tell when one of the 4Rx4 ECC modules needs replacing?

The ECC registered design logs corrected errors in the system event log; a rising correctable-error count on any of the four 32 GB modules signals that the DIMM should be swapped before uncorrectable failures appear.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.