نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green 240-pin DDR3 RDIMM modules with gold contacts and black chips

OWC

OWC 16GB DDR3 1333 ECC RDIMM 2Rx4 240-pin 1.5V memory upgrade

SKU CH-Z7AD-50GKW

16 GB DDR3-1333 ECC registered dual-rank kit for Dell PowerEdge R810, R910, M910, C2100 and C6105 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 16 GB kit (2 × 8 GB) expands capacity for virtualisation
  • DDR3 1333 MHz CL9 matches Dell PowerEdge specifications
  • 5 V operation keeps power draw low for dense configurations
  • Qualified replacement for Dell part numbers including A2984886 and SNPX3R5MC/8G

Server ECC RDIMM Kit

This 16GB kit contains two 8GB DDR3 1333 registered DIMMs built for Dell PowerEdge servers including the C2100, C6105, M910, R810 and R910. ECC and registered operation provide the error correction and signal integrity required by multi-socket workstation and server platforms. It will not work in standard desktop computers or alongside unbuffered modules.

Thermals and Power

Each module runs at the JEDEC standard 1.5V with no heat spreader, relying on the server chassis airflow for cooling. CL9 latency at PC3-10600 speed delivers the bandwidth these platforms expect without increasing power draw beyond the DDR3 specification. Registered buffering reduces electrical load on the memory controller, helping keep system power stable under full population.

Build and Compatibility

The 240-pin RDIMM form factor fits the target Dell PowerEdge slots directly, replacing Dell part numbers such as A2984886, A3198153, A3721483 and SNPX3R5MC/8G. 2Rx4 organisation matches the density requirements of the listed systems. JEDEC and RoHS compliance ensure a warranty-safe upgrade for extending older infrastructure or building cost-effective replacement servers.

أبرز المميزات

  • ECC registered design protects data integrity in server workloads
  • 16 GB kit (2 × 8 GB) expands capacity for virtualisation
  • DDR3 1333 MHz CL9 matches Dell PowerEdge specifications
  • 5 V operation keeps power draw low for dense configurations
  • Qualified replacement for Dell part numbers including A2984886 and SNPX3R5MC/8G

المواصفات

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge C2100
Dell PowerEdge C6105
Dell PowerEdge M910
Dell PowerEdge R810
Dell PowerEdge R910

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install the 240-pin DDR3 ECC RDIMM modules in a Dell PowerEdge R810, and which step is often missed?

Power down the server, open the chassis, align each 240-pin module with the DDR3 slot key notch, press firmly until both retention clips click, then verify in BIOS that all 16GB are recognised at 1333MHz; the step often missed is ensuring the registered ECC modules are seated in the correct channel order for the R810 memory configuration.

What maintenance or replacement will the 1.5V DDR3 1333 CL9 2Rx4 kit need over its service life?

No routine maintenance is required for the DDR3 RDIMM modules; replacement is only needed if a module fails, which would be indicated by ECC corrected-error counts rising in the server management log or the system failing to POST with the 16GB kit installed.

What limit appears first when the 2Rx4 ECC registered memory runs sustained workloads on a PowerEdge R910?

The DDR3 1333 PC3-10600 bandwidth ceiling is the first limit under sustained use; the 1.5V 2Rx4 modules operate at their rated 1333MHz CL9 speed, so throughput caps at the PC3-10600 data rate before thermal or voltage constraints become factors.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.