BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 16 GB DDR4 2666 CL19 SODIMM for laptops, all-in-ones and NAS systems, backward compatible with 2400 and 2133 MHz
This OWC module delivers 16GB of DDR4 memory at 2666MHz with CL19 latency. It uses the standard 260-pin SO-DIMM form factor and runs at 1.2V. The kit is designed as a direct replacement for specific QNAP part numbers and is validated for laptops, all-in-one systems and NAS devices.
The module is unbuffered and non-ECC, matching the requirements of most consumer laptops, mini desktops and compatible NAS appliances. It will not work in systems that require ECC or registered memory. Buyers needing error-correcting or buffered modules should look elsewhere.
The 260-pin DDR4 SO-DIMM interface is the single specification that determines whether this module installs in a given system. The board must accept DDR4 SO-DIMMs at 2666MHz, 2400MHz or 2133MHz. If the slot uses a different pin count or memory generation, the module will not seat.
| Brand | OWC |
|---|---|
| Part Number | 2S6D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Align the notch on the module with the key in the slot, insert at an angle, then press down firmly until both side clips click into place; the common mistake is stopping before the clips fully engage.
No routine maintenance is required; the module has no heat spreader and no moving parts, so it only needs replacement if a memory error appears or capacity must be increased.
The thermal limit of the laptop chassis typically appears first, because the module runs at standard JEDEC voltage without a spreader and relies on system airflow to stay within safe temperatures.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟