OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM for HP ProBook 455 G9 635 Aero G7
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16GB DDR4-2666 CL19 UDIMM module designed for Alienware Area-51 R3 through R7 desktops
This 16 GB DDR4 module is built for Alienware Area-51 desktops from the R3 through R7 revisions. It installs in a standard 288-pin UDIMM slot and runs at 1.2 V without ECC or buffering. The memory is validated to JEDEC specifications and carries a limited lifetime warranty from the manufacturer.
The kit suits owners of an Area-51 R3, R4, R5, R6 or R7 who want a straightforward capacity increase. Systems that require ECC registered DIMMs or a different pin count cannot use this module. Builders working on any other platform should verify their motherboard specifications before purchasing.
The module operates at PC4-21300 with a CAS latency of 19. It is backward compatible with 2133 MHz and 2400 MHz memory controllers, so it will downclock automatically in slower systems. This speed grade is the single specification that confirms whether the part matches the motherboard's supported memory profile.
| Brand | OWC |
|---|---|
| Part Number | 2U6D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Alienware Area-51 R3 Alienware Area-51 R4 Alienware Area-51 R5 Alienware Area-51 R6 Alienware Area-51 R7 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the module fits a standard 288-pin DDR4 UDIMM slot; one empty slot is required for installation.
The module is backward compatible with 2133MHz and 2400MHz DDR4 and will operate at the lowest common speed.
Check the memory speed and CAS latency in BIOS or a system-information tool such as CPU-Z to verify 2666MHz and CL19 timings.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟