نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green 288-pin DDR4 LRDIMM modules with black chips, no heat spreader

OWC

OWC 2L9D48R4256P 256GB (2x128GB) DDR4 2933 ECC LRDIMM memory upgrade

SKU CH-Z6SR-N5FB0

A 256 GB DDR4 2933 ECC load-reduced dual-rank kit for Supermicro X11SPD-F servers and workstations

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 256GB (2 x 128GB)

  • 256 GB capacity from two 128 GB modules
  • DDR4 2933 MHz speed with CL21 latency
  • ECC load-reduced design for server reliability
  • 2 V operation reduces power draw
  • Compatible with Supermicro X11SPD-F motherboard

Server-grade ECC LRDIMM kit

This 256GB kit contains two 128GB DDR4 2933 modules built to the PC4-23400 standard with CL21 latency. Each stick is a 288-pin load-reduced DIMM operating at 1.2V and carrying 8Rx4 organisation with ECC. The kit is validated for the Supermicro X11SPD-F motherboard and will not work in standard desktop systems or alongside unbuffered or registered ECC memory.

Sustained workload stability

Load-reduced architecture lowers electrical load on the memory controller, allowing the full 256GB to run at the rated 2933 speed without the signal degradation that limits conventional registered DIMMs at high density. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs, virtualisation workloads or ZFS storage pools. JEDEC-compliant 1.2V operation keeps thermals predictable inside densely populated server chassis.

Upgrade path for X11SPD-F platforms

The kit replaces lower-capacity DDR4 LRDIMM sets or fills empty slots on the X11SPD-F to reach the board's maximum supported memory. Backward compatibility with 2133, 2400 and 2666MHz buses lets the modules clock down automatically if the platform requires it. Buyers needing unbuffered desktop memory, registered ECC without load reduction, or capacities beyond 256GB per kit cannot use this product.

أبرز المميزات

  • 256 GB capacity from two 128 GB modules
  • DDR4 2933 MHz speed with CL21 latency
  • ECC load-reduced design for server reliability
  • 2 V operation reduces power draw
  • Compatible with Supermicro X11SPD-F motherboard

المواصفات

BrandOWC
Part Number2L9D48R4256P
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank8Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SPD-F

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How much power does each 128GB DDR4 2933 LRDIMM draw at 1.2V during continuous server operation?

Each module runs at 1.2V, the standard DDR4 voltage for LRDIMMs, so power draw stays within JEDEC limits for 8Rx4 Load Reduced DIMMs at 2933 MT/s.

What motherboard slot and chipset support is required to run this 256GB kit at its rated 2933 speed?

The kit is validated for the Supermicro X11SPD-F motherboard with 288-pin DDR4 slots; the CPU and chipset on that board must support DDR4-2933 LRDIMM operation.

Can I add these 2933 MT/s LRDIMMs to a system that currently uses 2400 MT/s ECC registered DIMMs?

No — Load Reduced and Registered ECC DIMMs cannot be mixed, and the X11SPD-F requires all slots to use the same LRDIMM type.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.